izpis_h1_title_alt

Defluorination of polytetrafluoroethylene surface by hydrogen plasma
ID Vesel, Alenka (Author), ID Lojen, Dane (Author), ID Zaplotnik, Rok (Author), ID Primc, Gregor (Author), ID Mozetič, Miran (Author), ID Ekar, Jernej (Author), ID Kovač, Janez (Author), ID Gorjanc, Marija (Author), ID Kurečič, Manja (Author), ID Stana-Kleinschek, Karin (Author)

.pdfPDF - Presentation file, Download (4,40 MB)
MD5: 7C2F53C668975FC6486A0666B8757875
URLURL - Source URL, Visit https://www.mdpi.com/2073-4360/12/12/2855 This link opens in a new window

Abstract
Defluorination of polytetrafluoroethylene (PTFE) surface film is a suitable technique for tailoring its surface properties. The influence of discharge parameters on the surface chemistry was investigated systematically using radio-frequency inductively coupled H$_2$ plasma sustained in the E- and H-modes at various powers, pressures and treatment times. The surface finish was probed by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The measurements of water contact angles (WCA) showed increased wettability of the pristine PTFE; however, they did not reveal remarkable modification in the surface chemistry of the samples treated at various discharge parameters. By contrast, the combination of XPS and ToF-SIMS, however, revealed important differences in the surface chemistry between the E- and H-modes. A well-expressed minimum in the fluorine to carbon ratio F/C as low as 0.2 was observed at the treatment time as short as 1 s when plasma was in the H-mode. More gradual surface chemistry was observed when plasma was in the E-mode, and the minimal achievable F/C ratio was about 0.6. The results were explained by the synergistic effects of hydrogen atoms and vacuum ultraviolet radiation.

Language:English
Keywords:polytetrafluoroethylene, fluorine depletion, hydrogen plasma, VUV radiation, surface modification, hydrophilic
Work type:Article
Typology:1.01 - Original Scientific Article
Organization:NTF - Faculty of Natural Sciences and Engineering
Publication status:Published
Publication version:Version of Record
Year:2020
Number of pages:14 str.
Numbering:Vol. 12, iss. 12, art. 2855
PID:20.500.12556/RUL-134842 This link opens in a new window
UDC:53
ISSN on article:2073-4360
DOI:10.3390/polym12122855 This link opens in a new window
COBISS.SI-ID:39928579 This link opens in a new window
Publication date in RUL:04.02.2022
Views:983
Downloads:160
Metadata:XML DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Record is a part of a journal

Title:Polymers
Shortened title:Polymers
Publisher:MDPI
ISSN:2073-4360
COBISS.SI-ID:517951257 This link opens in a new window

Licences

License:CC BY 4.0, Creative Commons Attribution 4.0 International
Link:http://creativecommons.org/licenses/by/4.0/
Description:This is the standard Creative Commons license that gives others maximum freedom to do what they want with the work as long as they credit the author.
Licensing start date:01.12.2020

Projects

Funder:ARRS - Slovenian Research Agency
Project number:J2-1728
Name:Začetne stopnje površinske funkcionalizacije polimerov s plazemskimi radikali

Funder:ARRS - Slovenian Research Agency
Project number:P2-0082
Name:Tankoplastne strukture in plazemsko inženirstvo površin

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back