izpis_h1_title_alt

Centre of pressure estimation during walking using only inertial-measurement units and end-to-end statistical modelling
ID Podobnik, Janez (Author), ID Kraljić, David (Author), ID Zadravec, Matjaž (Author), ID Munih, Marko (Author)

.pdfPDF - Presentation file, Download (1,55 MB)
MD5: E12833DCCC9AD46A9447DEACA6917676
URLURL - Source URL, Visit https://www.mdpi.com/1424-8220/20/21/6136 This link opens in a new window

Abstract
Estimation of the centre of pressure (COP) is an important part of the gait analysis, for example, when evaluating the functional capacity of individuals affected by motor impairment. Inertial measurement units (IMUs) and force sensors are commonly used to measure gait characteristic of healthy and impaired subjects. We present a methodology for estimating the COP solely from raw gyroscope, accelerometer, and magnetometer data from IMUs using statistical modelling. We demonstrate the viability of the method using an example of two models: a linear model and a non-linear Long-Short-Term Memory (LSTM) neural network model. Models were trained on the COP ground truth data measured using an instrumented treadmill and achieved the average intra-subject root mean square (RMS) error between estimated and ground truth COP of 12.3 mm and the average inter-subject RMS error of 23.7 mm which is comparable or better than similar studies so far. We show that the calibration procedure in the instrumented treadmill can be as short as a couple of minutes without the decrease in our model performance. We also show that the magnetic component of the recorded IMU signal, which is most sensitive to environmental changes, can be safely dropped without a significant decrease in model performance. Finally, we show that the number of IMUs can be reduced to five without deterioration in the model performance.

Language:English
Keywords:gait analysis, inertial measurement units, gait model, estimation of centre of pressure, artificial neural networks, wearable sensors, balance, rehabilitation
Work type:Article
Typology:1.01 - Original Scientific Article
Organization:FE - Faculty of Electrical Engineering
Publication status:Published
Publication version:Version of Record
Year:2020
Number of pages:20 str.
Numbering:Vol. 20, iss. 21, art. 6136
PID:20.500.12556/RUL-134712 This link opens in a new window
UDC:681.586
ISSN on article:1424-8220
DOI:10.3390/s20216136 This link opens in a new window
COBISS.SI-ID:34924291 This link opens in a new window
Publication date in RUL:27.01.2022
Views:922
Downloads:144
Metadata:XML DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Record is a part of a journal

Title:Sensors
Shortened title:Sensors
Publisher:MDPI
ISSN:1424-8220
COBISS.SI-ID:10176278 This link opens in a new window

Licences

License:CC BY 4.0, Creative Commons Attribution 4.0 International
Link:http://creativecommons.org/licenses/by/4.0/
Description:This is the standard Creative Commons license that gives others maximum freedom to do what they want with the work as long as they credit the author.
Licensing start date:01.11.2020

Secondary language

Language:Slovenian
Keywords:analiza hoje, inercialna merilna enota, modeli hoje, ocena prijemališča sile, nevronske mreže, nosljivi senzorji

Projects

Funder:ARRS - Slovenian Research Agency
Project number:P2-0228
Name:Analiza in sinteza gibanja pri človeku in stroju

Funder:ARRS - Slovenian Research Agency
Project number:J2-8172
Name:Mehanizmi vzdrževanja dinamičnega ravnotežja med hojo človeka

Funder:EC - European Commission
Funding programme:H2020
Project number:731931
Name:The CYBERnetic LowEr-Limb CoGnitive Ortho-prosthesis Plus Plus
Acronym:CYBERLEGs Plus Plus

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back