Analiza vpliva podlage na oprijemljivost materiala pri aditivni izdelavi s postopkom ciljnega nalaganja polimera

Šučur, Uroš (author), Pušavec, Franci (mentor)

Diplomsko delo zajema analizo vpliva podlage na oprijemljivost materiala pri aditivni izdelavi s postopkom ciljnega nalaganja polimera z uporabo 3D tiskalnika. Uporabljen je bil tiskalnik Creality CR10, ki deluje po FDM metodi. Za analizo oprijemljivosti materiala se je tiskala ploščica pri različnih temperaturah podlage in z uporabo različnih adhezivnih sredstev. Opravljenih je bilo šest različnih tiskov. Najprej se je natisnilo tri ploščice pri treh različnih podlagah brez adhezivnih sredstev, nato pa je sledilo še tiskanje na vseh treh podlagah z uporabo treh različnih adhezivnih sredstev. Analiza ploščic se je opravila pod mikroskopom VHX-6000. Ugotovljeno je bilo, da je ploščica, natisnjena pri temperaturi 70 °C z uporabo adhezivnega sredstva Dimafix, najboljši približek idealnemu tisku. Prav tako je ta ploščica imela najbolj optimalno vizualno oceno in jo je bilo najlažje odstraniti iz grelne plošče po končanem tisku.

• Language: Slovenian
• Keywords: podlage, ciljno nalaganje polimera, adhezivna sredstva, 3D tiskanje, mikroskopi, temperatura podlage
• Work type: Final paper
• Typology: 2.11 - Undergraduate Thesis
• Organization: FS - Faculty of Mechanical Engineering
• Place of publishing: Ljubljana
• Publisher: [U. Šučur]
• Year: 2021
• Number of pages: XIV, 35 str.
• PID: 20.500.12556/RUL-134598
• UDC: 621.79:678:004.925.84(043.2)
• COBISS.SI-ID: 94706179
• Publication date in RUL: 20.01.2022

ŠUČUR, Uroš, 2021, Analiza vpliva podlage na oprijemljivost materiala pri aditivni izdelavi s postopkom ciljnega nalaganja polimera [online]. Bachelor’s thesis. Ljubljana : U. Šučur. [Accessed 26 April 2025]. Retrieved from: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=eng&id=134598

Secondary language

• Language: English
• Title: Analysis of the influence of the substrate on the adhesion of the material in additive manufacturing by the process of target polymer loading method

Abstract

The diploma thesis includes an analysis of the influence of the substrate on adhesion of the material in additive manufacturing by the process of targeted polymer loading method. A Creality CR10 printer using the FDM method was used. To analyze the adhesion of the material, the plate was printed at different substrate temperatures and with different adhesives. Six different prints were made. First, three tiles were printed on three different substrates without adhesives, then all three substrates were printed with three different adhesives. Analysis of the tiles was performed under a VHX-6000 microscope. It was found that the tile printed with the Dimafix adhesive was the best approximation to the ideal print, also in terms of aesthetics and removal of the tile from the hot plate after printing.

• Keywords: basis, bused deposition modeling, adhesives, 3D printing, microscopes, basis temperature