Experimental response of hot-rolled stainless steel angle columns

Filipović, Aljoša (author), Dobrić, Jelena (author), Baddoo, Nancy (author), Može, Primož (author)

This paper reports on experiments addressing the buckling and collapse behaviour of pin-ended hot-rolled stainless steel equal-leg angle columns under pure axial compression, aiming to provide reliable experimental data needed to develop explicit design guidelines for hot-rolled stainless steel angle columns currently absent in European standard. The systematic experimental programme included two test groups of specimens with nominal dimensions of 60 6 mm and 100 10 mm produced from austenitic grade EN 1.4301, and involved tensile material tests, geometric imperfection measurements, residual stress measurements, 6 stub column tests and 20 global compression tests. A wide range of column slenderness ratios was carefully selected to account for both elastic and inelastic failure characteristics including flexural and flexural%torsional modes and the influence of the legs% width-to-thickness ratios. The test setup and procedure together with the key experimental results and characterised failure modes, were fully reported and discussed. The test results were compared with those predicted using the design methods for compressed stainless steel angle columns provided in European and North American standards. It was observed that the specifications offer conservative strength predictions of the tested columns, primarily due to the lower distribution of initial geometric imperfections of tested columns in comparison with the permissible fabrication tolerances that are usually used as the basis of stability checks in codified design.

• Language: English
• Keywords: civil engineering, stainless steel, experiment, equal-leg angle section, hot-rolled, residual stress, column buckling
• Work type: Scientific work
• Typology: 1.01 - Original Scientific Article
• Organization: FGG - Faculty of Civil and Geodetic Engineering
• Publication status: Published
• Publication version: Version of Record
• Submitted for review: 07.10.2020
• Article acceptance date: 07.03.2021
• Publication date: 26.03.2021
• Year: 2021
• Number of pages: Str. 1-21
• Numbering: Letn. 163, št. 107659
• PID: 20.500.12556/RUL-127275
• UDC: 624.07
• ISSN on article: 0263-8231
• DOI: 10.1016/j.tws.2021.107659
• COBISS.SI-ID: 58659587
• Publication date in RUL: 01.06.2021

Record is a part of a journal

• Title: Thin-walled structures
• Shortened title: Thin-walled struct.
• Publisher: Elsevier
• ISSN: 0263-8231
• COBISS.SI-ID: 26529536

Secondary language

• Language: Slovenian
• Keywords: gradbeništvo, nerjavno jeklo, eksperiment, enakokraki kotnik, vroče valjanje, zaostale napetosti, uklon stebra

Projects

• Funder: MESTD - Ministry of Education, Science and Technological Development of Republic of Serbia
• Project number: 200092