izpis_h1_title_alt

Numerical simulation of a ground anchor pullout test monitored with fiber optic sensors
ID Fabris, Carla (Author), ID Schweiger, Helmut F. (Author), ID Pulko, Boštjan (Author), ID Woschitz, Helmut (Author), ID Račanský, Václav (Author)

URLURL - Source URL, Visit https://doi.org/10.1061/(ASCE)GT.1943-5606.0002442 This link opens in a new window

Abstract
This paper presents a comprehensive study of the load transfer mechanism of a soil anchor during pullout test. The anchor was monitored with fiber optic sensors installed along the tendon and embedded in the grout, which enabled continuous measurements of strains with a spatial resolution of about 10 mm. The measured strain profile along the tendon indicates that the load is not transferred from the tendon to the grout at the same rate along the fixed length. Crack development was verified by measured peaks along the longitudinal strain profile. The in situ measurements were compared with results from finite-element simulations contributing to the interpretation of the in situ results. The load displacement curves and strain distributions obtained with the numerical simulations compare well with measurements. The constitutive model selected for the grout is capable of reproducing the crack development and the numerical simulations suggest that debonding occurred during the anchor pullout test.

Language:English
Keywords:civil engineering, numerical simulations, geotechnical engineering, ground anchors, pullout test, optical fiber sensors
Work type:Scientific work
Typology:1.01 - Original Scientific Article
Organization:FGG - Faculty of Civil and Geodetic Engineering
Publication status:Published
Publication version:Author Accepted Manuscript
Year:2020
Number of pages:Str. 1-10
Numbering:letn. 147, Št. 2/04020163 (1-10)
PID:20.500.12556/RUL-125095 This link opens in a new window
UDC:624.1
ISSN on article:1090-0241
DOI:10.1061/(ASCE)GT.1943-5606.0002442 This link opens in a new window
COBISS.SI-ID:40033795 This link opens in a new window
Publication date in RUL:04.03.2021
Views:1504
Downloads:116
Metadata:XML RDF-CHPDL DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Record is a part of a journal

Title:Journal of geotechnical and geoenvironmental engineering
Shortened title:J. geotech. geoenviron. eng.
Publisher:American Society of Civil Engineers
ISSN:1090-0241
COBISS.SI-ID:17224453 This link opens in a new window

Licences

License:CC BY-NC-ND 4.0, Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
Link:http://creativecommons.org/licenses/by-nc-nd/4.0/
Description:The most restrictive Creative Commons license. This only allows people to download and share the work for no commercial gain and for no other purposes.
Licensing start date:04.03.2021

Secondary language

Language:Slovenian
Keywords:gradbeništvo, geotehnika, numerične analize, geotehnična sidra, izvlečni preiskus, meritve z optičnimi vlakni

Projects

Funder:ARRS - Slovenian Research Agency
Project number:BI-AT/18-19-028
Name:Analiza napetostnega in deformacijskega stanja prednapetih geotehničnih sider

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back