izpis_h1_title_alt

Vzvratno inženirstvo pri izdelavi lesene armaturne plošče
ID Pušnik, Lan (Author), ID Merhar, Miran (Mentor) More about this mentor... This link opens in a new window

.pdfPDF - Presentation file, Download (2,73 MB)
MD5: 512734A4FB4319D84B529BDA245E64AC

Abstract
V nalogi smo opisali proces vzvratnega inženirstva pri izdelavi lesene armaturne plošče. Obliko izbrane armaturne plošče smo z uporabo 3D-čitalnika FaroArm prenesli v Solidworks. Originalno armaturno ploščo smo proučili in določili, katera pritrditvena mesta in ojačitve bomo izdelali. Prav tako smo pregledali ogrodje avtomobila, kamor se pritrdi armaturna plošča, in na osnovi tega določili odebelitvena mesta izdelane križno lepljene furnirne plošče. V programu Solidworks smo ustvarili solid model armaturne plošče, na podlagi katerega smo določili kalup za stiskanje armaturne plošče debeline 2,5 mm, narejene iz slojev furnirja hrasta, bukve in oreha. V programu Solidcam smo izdelali G-kodo za izdelavo kalupa in končni obrez armaturne plošče na triosnem CNC-stroju. Uporabili smo funkcije »Contour 3D«, »3D HSR« in »3D HSM« ter pri »HSM« strategijo »3D constant stepover«. Za pritrditev armaturne plošče med obdelavo na CNC-stroju smo uporabili pozitivni in negativni del kalupa. Po obdelavi na CNC-stroju smo armaturno ploščo zbrusili in nanesli akrilni lak.

Language:Slovenian
Keywords:lesena armaturna plošča, vzvratno inženirstvo, 3D čitalnik
Work type:Master's thesis/paper
Typology:2.09 - Master's Thesis
Organization:BF - Biotechnical Faculty
Publisher:[L. Pušnik]
Year:2020
PID:20.500.12556/RUL-121857 This link opens in a new window
UDC:674.05:621.9
COBISS.SI-ID:35549955 This link opens in a new window
Publication date in RUL:04.11.2020
Views:766
Downloads:63
Metadata:XML RDF-CHPDL DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Secondary language

Language:English
Title:Reverse engineering in production process of wooden dashboard
Abstract:
Reverse engineering in the production process of making a wooden dashboard is described in the thesis. For the shape, A pre-existing synthetic dashboard was used and imported into Solidworks using a FaroArm 3D scanner. The dashboard was examined, and the choice was made as to which anchor points were going to be produced. The frame of the car was examined, and using this information reinforcements on the board were located. A solid model of the dashboard was made in Solidworks. Based on the model, the mould for compressing of the board was determined. Curved plywood with a thickness of 2.5 mm was produced using beech, oak, and walnut veneer, along with a mould with the desired curvature. The G-code for cutting of the mould was made in Solidcam, and the final cutting of the board was carried out. Contour 3D, 3D HSR, and 3D HSM were used in Solidcam, with 3D constant stepover within the HSM function. The curved boards were cut using a 3D CNC machine. During the process of cutting for the fixation of the curved boards, positive and negative parts were used. At the end acrylic paint was applied on the dashboard.

Keywords:wooden dashboard, reverse engineering, 3D scanner

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back