Thin-walled Ni-Ti tubes under compression : ideal candidates for efficient and fatigue-resistant elastocaloric cooling

Porenta, Luka (author), Kabirifar, Parham (author), Žerovnik, Andrej (author), Čebron, Matjaž (author), Žužek, Borut (author), Dolenec, Matej (author), Brojan, Miha (author), Tušek, Jaka (author)

Elastocaloric cooling is emerging as one of the most promising alternatives to vapor-compression cooling technology. It is based on the elastocaloric effect (eCE) of shape memory alloys (SMAs), which occurs due to a stress-induced martensitic transformation (superelasticity). In recent years, several elastocaloric proof-of-concept devices have been developed and the best of them have already achieved commercially relevant cooling characteristics. However, the proposed devices are not yet ready for commercialization, mostly due to their short fatigue life, which is a consequence of the tensile loading. The fatigue life can be significantly improved if the material is instead subjected to compressive loading, but mechanical instabilities (buckling) and the poor heat transfer of bulky geometries (favorable for compression) are the major challenges to overcome when designing compressed elastocaloric elements. Here, we show for the first time that thin-walled Ni-Ti tubes, which allow for the rapid heat transfer, can withstand more than 10$^6$ compressive loading cycles without any degradation of the eCE while maintaining high efficiency (coefficient of performance) and adiabatic temperature changes as high as 27 K. This is the largest, directly measured, durable eCE for any elastocaloric material in the high-cycle fatigue regime to date, and so opens up new avenues in the development of durable and efficient elastocaloric devices.

• Language: English
• Keywords: elastocaloric effect, shape memory alloys, fatigue life, compressive loading, buckling
• Work type: Article
• Typology: 1.01 - Original Scientific Article
• Organization: FS - Faculty of Mechanical Engineering; NTF - Faculty of Natural Sciences and Engineering
• Publication status: Published
• Publication version: Version of Record
• Year: 2020
• Number of pages: 9 str.
• Numbering: Vol. 20, art. 100712
• PID: 20.500.12556/RUL-116755
• UDC: 519.6:620.178(045)
• ISSN on article: 2352-9415
• DOI: 10.1016/j.apmt.2020.100712
• COBISS.SI-ID: 18414339
• Publication date in RUL: 08.06.2020

PORENTA, Luka, KABIRIFAR, Parham, ŽEROVNIK, Andrej, ČEBRON, Matjaž, ŽUŽEK, Borut, DOLENEC, Matej, BROJAN, Miha and TUŠEK, Jaka, 2020, Thin-walled Ni-Ti tubes under compression : ideal candidates for efficient and fatigue-resistant elastocaloric cooling. Applied materials today [online]. 2020. Vol. 20,  100712. [Accessed 23 March 2025]. DOI 10.1016/j.apmt.2020.100712. Retrieved from: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=eng&id=116755

Record is a part of a journal

• Title: Applied materials today
• Publisher: Elsevier
• ISSN: 2352-9415
• COBISS.SI-ID: 527289625

Licences

• License: CC BY-NC-ND 4.0, Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
• Link: http://creativecommons.org/licenses/by-nc-nd/4.0/
• Description: The most restrictive Creative Commons license. This only allows people to download and share the work for no commercial gain and for no other purposes.

Secondary language

• Language: Slovenian
• Keywords: elastokalorični učinek, zlitine z oblikovnim spominom, doba trajanja, tlačno obremenjevanje, uklon

Projects

• Funder: EC - European Commission
• Funding programme: H2020
• Project number: 803669
• Name: Superelastic Porous Structures for Efficient Elastocaloric Cooling
• Acronym: SUPERCOOL