izpis_h1_title_alt

Corrosion performance of steel in blended cement pore solutions
ID Hren, Miha (Author), ID Kosec, Tadeja (Author), ID Legat, Andraž (Author), ID Bokan-Bosiljkov, Violeta (Author)

.pdfPDF - Presentation file, Download (1,80 MB)
MD5: E343634915AD2B5F9D83F723E9B57E5B
URLURL - Source URL, Visit http://mit.imt.si/izvodi/mit195/hren.pdf This link opens in a new window

Abstract
Blended cements might change the chemistry of the pore solution and subsequently affect the corrosion of steel in concrete. Pore solutions were extracted, analyzed and compared from mortars made of CEM I, CEM II, CEM III and CEM IV cements. Three combinations of carbonation and chloride states were studied, i.e., non-carbonated without chlorides, non-carbonated with chlorides and carbonated with chlorides. Different electrochemical and spectroscopic techniques were used to study the electrochemical properties, the type and the extent of the corrosion products, as well as the type and the extent of the corrosion damage. It was confirmed that the most corrosive environments were pore solutions extracted from the carbonated mortars with chlorides. In this environment the highest corrosion rate was observed for the CEM III pore solution, and the lowest for the CEM I. The extent and the type of corrosion products and the corrosion damage varied according to the environment.

Language:English
Keywords:corrosion, blended cements, pore solution, mortar
Work type:Scientific work
Typology:1.01 - Original Scientific Article
Organization:FGG - Faculty of Civil and Geodetic Engineering
Publication status:Published
Publication version:Author Accepted Manuscript
Year:2019
Number of pages:Str. 679-686
Numbering:Letn. 53, št. 5
PID:20.500.12556/RUL-114845 This link opens in a new window
UDC:620.193:691.714.018.8:666.9.022.6
ISSN on article:1580-2949
DOI:10.17222/mit.2019.003 This link opens in a new window
COBISS.SI-ID:8981345 This link opens in a new window
Publication date in RUL:19.03.2020
Views:1967
Downloads:557
Metadata:XML DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Record is a part of a journal

Title:Materiali in tehnologije
Shortened title:Mater. tehnol.
Publisher:Inštitut za kovinske materiale in tehnologije
ISSN:1580-2949
COBISS.SI-ID:106193664 This link opens in a new window

Licences

License:CC BY-NC-ND 4.0, Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
Link:http://creativecommons.org/licenses/by-nc-nd/4.0/
Description:The most restrictive Creative Commons license. This only allows people to download and share the work for no commercial gain and for no other purposes.
Licensing start date:19.03.2020

Secondary language

Language:Slovenian
Title:Korozijska odpornost jekla v pornih vodah iz mešanih cementov
Abstract:
Cementi z mineralnimi dodatki lahko spremenijo strukturo porne vode in posledično vplivajo na korozijske lastnosti jekla. Porne vode so bile iztisnjene in analizirane iz malt, narejenih iz CEM I, CEM II, CEM III in CEM IV cementov. Malte so bile predhodno izpostavljene kloridom ali pospešeni karbonatizaciji v treh kombinacijah: brez karbonatizacije in brez kloridov, brez karbonatizacije s kloridi in v karbonatizaciji s kloridi. Za ugotavljanje korozijskih lastnosti jekla v pornih vodah so bile uporabljene različne elektrokemijske in spektroskopske metode. Analizirane so bile elektrokemijske lastnosti, tip in obseg korozijskih produktov ter tip in obseg korozijskih poškodb. Ugotovljeno je bilo, da najbolj korozivno okolje pripada pornim vodam v karbonatizirani malti s kloridi, kjer je bila najvišja korozijska hitrost izmerjena v pornih vodah iz CEM III cementa, najmanj{a pa iz CEM I cementa. Obseg in tip korozijskih produktov ter poškodb se je razlikoval skladno s korozivnostjo okolja.

Keywords:korozija, mešanica cementov, porna voda, malta

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back