Analiza kapljic olja pri enokanalnem dovodu kapljevitega CO2 in olja za proces kriogenega odrezavanja

Balantič, Nejc (author), Pušavec, Franci (mentor)

Zaključna naloga obravnava alternativno tehnologijo hlajenja in mazanja orodja in materiala pri tehnologijah odrezavanja. Razvit je bil enokanalni sistem (ArcLub One) dovajanja MQL in CO2 v rezalno cono. Pregled znanstvenih del s področja MQL nam je razkril optimalne parametre za izvedbo eksperimentov. Z eksperimenti, ki so bili izvedeni v okviru zaključne naloge, smo skušali dokazati, kolikšna je povprečna velikost kapljic pri različnih parametrih dovajanja MQL in CO2 in kako se različna olja izkažejo pri mešanju s CO2. Ugotovljeno je bilo, da povprečni radij kapljic z višanjem volumskega pretoka olja raste in da se kapljice pri višjem pretoku CO2 bolj razpršijo po površini. MQL olja so prikazala boljše rezultate od baznih olj, saj so bile kapljice manjše in bolj razpršene po površini.

• Language: Slovenian
• Keywords: odrezavanje, hladilno mazalne tekočine, mazanje, kapljeviti ogljikov dioksid, MQL olja, velikost kapljic
• Work type: Final paper
• Typology: 2.11 - Undergraduate Thesis
• Organization: FS - Faculty of Mechanical Engineering
• Place of publishing: Ljubljana
• Publisher: [N. Balantič]
• Year: 2019
• Number of pages: XII, 30 f.
• PID: 20.500.12556/RUL-110174
• UDC: 621.9:621.892:62-72(043.2)
• COBISS.SI-ID: 16900379
• Publication date in RUL: 12.09.2019

Secondary language

• Language: English
• Title: Analysis of oil droplets in single-channel supply of liquid CO2 and oil for cryognenic machining

Abstract

The finalised work examines the alternative cooling and lubricating technologies for machinery and materials in machining. One-channel system (ArcLub One) was developed for feeding the Minimum Quantity Lubrication (MQL) and CO2 into the machining zone. Review of existing research done into MQL determined the optimal parameters used in experimental work. The aim of this work was to determine the average size of droplets with varying feeding parameters of MQL and CO2, and the behaviour of different oils in mixing with CO2. It was determined the average radius of droplets increases with increasing volume flow of oil and droplets spread out more at higher volume flow of CO2. MQL oils performed better than base oils as the droplets were smaller and more spread out on the surface.

• Keywords: machining, coolant lubricant, lubrication, liquid carbon dioxide, MQL oils, droplet size