izpis_h1_title_alt

Methodology for processing pressure traces used as inputs for combustion analyses in diesel engines
ID Rašić, Davor (Author), ID Vihar, Rok (Author), ID Žvar Baškovič, Urban (Author), ID Katrašnik, Tomaž (Author)

.pdfPDF - Presentation file, Download (2,86 MB)
MD5: 34BD2CCF22BA3B2DA4ED9862D462D060
URLURL - Source URL, Visit http://iopscience.iop.org/article/10.1088/1361-6501/aa5f9e This link opens in a new window

Abstract
This study proposes a novel methodology for designing an optimum equiripple finite impulse response (FIR) filter for processing in-cylinder pressure traces of a diesel internal combustion engine, which serve as inputs for high-precision combustion analyses. The proposed automated workflow is based on an innovative approach of determining the transition band frequencies and optimum filter order. The methodology is based on discrete Fourier transform analysis, which is the first step to estimate the location of the pass-band and stop-band frequencies. The second step uses short-time Fourier transform analysis to refine the estimated aforementioned frequencies. These pass-band and stop-band frequencies are further used to determine the most appropriate FIR filter order. The most widely used existing methods for estimating the FIR filter order are not effective in suppressing the oscillations in the rate-of-heat-release (ROHR) trace, thus hindering the accuracy of combustion analyses. To address this problem, an innovative method for determining the order of an FIR filter is proposed in this study. This method is based on the minimization of the integral of normalized signal-to-noise differences between the stop-band frequency and the Nyquist frequency. Developed filters were validated using spectral analysis and calculation of the ROHR. The validation results showed that the filters designed using the proposed innovative method were superior compared with those using the existing methods for all analyzed cases.

Language:English
Keywords:diesel engines, FIR filters, harmonics, spectral analyses
Work type:Article
Typology:1.01 - Original Scientific Article
Organization:FS - Faculty of Mechanical Engineering
Publication status:Published
Publication version:Author Accepted Manuscript
Year:2017
Number of pages:Str. 1-22
Numbering:Vol. 28, iss. 5
PID:20.500.12556/RUL-106226 This link opens in a new window
UDC:621.43(045)
ISSN on article:0957-0233
DOI:10.1088/1361-6501/aa5f9e This link opens in a new window
COBISS.SI-ID:15304475 This link opens in a new window
Publication date in RUL:13.02.2019
Views:1189
Downloads:686
Metadata:XML RDF-CHPDL DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Record is a part of a journal

Title:Measurement science & technology
Shortened title:Meas. sci. technol.
Publisher:IOP Publishing
ISSN:0957-0233
COBISS.SI-ID:6000901 This link opens in a new window

Secondary language

Language:Slovenian
Keywords:dizelski motorji, FIR filtri, harmoniki, spektralna analiza

Projects

Funder:ARRS - Slovenian Research Agency
Project number:P2-0401
Name:Energetsko strojništvo

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back