High-speed camera thermometry of laser droplet generation

Bizjan, Benjamin (author), Kuznetsov, Alexander (author), Jeromen, Andrej (author), Govekar, Edvard (author), Širok, Brane (author)

This paper presents a high-speed thermal imaging method using a visible light camera, with application to the laser droplet generation process (LDG). In the experiment, a nickel wire-end was exposed to a collimated laser beam, and the subsequent process of wire melting, pendant droplet formation and its detachment were recorded by a high speed camera. Instantaneous temperature fields of the metal surface were calculated from the imaging data and were characterized by a very good spatial and temporal resolution (200 x 400 pixels at 13,837 frames per second). The droplet temperature could be accurately calculated between the melting point of nickel (1455 °C) and approximately 1950 °C, where image saturation started to occur. The remaining pendant droplet was shown to cool much more rapidly than the detached droplet, which is due to the heat conduction to the solid wire. Except for the time immediately after the droplet separation, the temperature distribution across the melt droplets was found to be quite uniform. Apart from the possibility of temperature field calculation, it was also demonstrated that the high-speed images of the LDG process can accurately capture contours and oscillation dynamics of melt droplets.

• Language: English
• Keywords: laser droplet generation, temperature measurement, high-speed camera, melting, droplet detachment, fluid dynamics
• Work type: Article
• Typology: 1.01 - Original Scientific Article
• Organization: FS - Faculty of Mechanical Engineering
• Publication status: Published
• Publication version: Author Accepted Manuscript
• Year: 2017
• Number of pages: Str. 298-305
• Numbering: Vol. 110
• PID: 20.500.12556/RUL-105932
• UDC: 536.52:681.783.332(045)
• ISSN on article: 1359-4311
• DOI: 10.1016/j.applthermaleng.2016.08.182
• COBISS.SI-ID: 14815515
• Publication date in RUL: 24.12.2018

Record is a part of a journal

• Title: Applied thermal engineering
• Shortened title: Appl. therm. eng.
• Publisher: Elsevier
• ISSN: 1359-4311
• COBISS.SI-ID: 1861910

Secondary language

• Language: Slovenian
• Keywords: laserska tvorba kapljic, merjenje temperature, hitre kamere, taljenje kapljic, ločevanje kapljic, dinamika tekočin

Projects

• Funder: ARRS - Slovenian Research Agency
• Project number: P2-0241
• Name: Sinergetika kompleksnih sistemov in procesov