Longitudinalne zaostale napetosti v zvarih visoko-trdnostnih aluminijevih zlitin

Smolej, Anže (author), Trdan, Uroš (mentor), Klobčar, Damjan (comentor)

Aluminijeve zlitine so zaradi dobrih fizikalnih in mehanskih lastnosti uveljavljene v najzahtevnejših inženirskih aplikacijah. Hkrati razvoj novih tehnologij varjenja omogoča spajanje visoko-trdnostnih aluminijevih zlitin, ki so s konvencionalnimi postopki izredno težko varive, in ponuja najrazličnejše raziskave mehanskih lastnosti ter razmer v takih zvarnih spojih. V zaključni nalogi smo zato analizirali longitudinalne zaostale napetosti v spojih raznorodnih visoko-trdnostnih aluminijevih zlitin 7075-T651 in 2017A-T451. S postopkom varjenja z gnetenjem smo uspešno izdelali šest vzorčnih spojev, z različnimi varilnimi parametri. V nadaljevanju smo v izbranih merilnih mestih z metodo rentgenske difrakcije izmerili zaostale napetosti v vzdolžni smeri glede na potek varjenja. Na podlagi izvedenih meritev smo ovrednotili grafe porazdelitve zaostalih napetosti ter dokazali, da so zaostale napetosti v območju spoja pozitivne, tj. natezne, ki pa z odmikom od zvara preidejo v tlačne. Ugotovili smo tudi, da so večji ekstremi zaostalih napetosti prisotni na nazadujoči strani zvarov, pri čemer smo najvišje vrednosti izmerili v vzorcu, zvarjenem z najvišjo podajalno hitrostjo.

• Language: Slovenian
• Keywords: aluminijeve zlitine, varjenje z gnetenjem, zaostale napetosti, rentgenska difrakcija
• Work type: Final paper
• Typology: 2.11 - Undergraduate Thesis
• Organization: FS - Faculty of Mechanical Engineering
• Publisher: [A. Smolej]
• Year: 2018
• PID: 20.500.12556/RUL-103125
• UDC: 621.791:669(043.2)
• COBISS.SI-ID: 16235547
• Publication date in RUL: 14.09.2018

SMOLEJ, Anže, 2018, Longitudinalne zaostale napetosti v zvarih visoko-trdnostnih aluminijevih zlitin [online]. Bachelor’s thesis. A. Smolej. [Accessed 22 March 2025]. Retrieved from: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=eng&id=103125

Secondary language

• Language: English
• Title: Longitudinal residual stresses in high-strength aluminium alloy welds

Abstract

Aluminium alloys are established in the most demanding engineering applications because of good physical and mechanical characteristics. At the same time the development of new welding technologies enables joining of high-strength aluminium alloys, which are hard to weld by conventional fusion welding. This offers different researches of mechanical properties and circumstances in such weld joints. In the final project paper we therefore analysed longitudinal residual stresses in joints of dissimilar high-strength aluminium alloys 7075-T651 and 2017A-T451. With the friction stir welding procedure we successfully created six sample joints with different welding parameters. Further, in selected measuring points longitudinal residual stresses according to the welding direction were measured by the method of x-ray diffraction. On the basis of performed measurements we evaluated the distribution graphs of residual stresses and proved that the residual stresses in the stir-zone are positive, that is tensile. By moving away from the weld joint tensile residual stresses become compressive stresses. We also found out that bigger extremes of residual stresses are present on the retreating side and the highest values were measured in the specimen welded with the highest rotation rate.

• Keywords: alluminium alloys, friction stir welding, residual stresses, x-ray diffraction