izpis_h1_title_alt

Analiza rezalnega orodja in parametrov za povečanje produktivnosti pri frezanju titanove zlitine Ti-6Al-4v
ID Kastelic, Luka (Author), ID Pušavec, Franci (Mentor) More about this mentor... This link opens in a new window, ID Kopač, Janez (Co-mentor)

.pdfPDF - Presentation file, Download (11,64 MB)
MD5: 5F67C94216F28A57AFB947E21A1B3D92

Abstract
V magistrskem delu je predstavljen postopek izbire ustreznega rezalnega orodja in optimizacija rezalnih parametrov za dosego čim večje produktivnosti pri frezanju titanove zlitine Ti-6Al-4V. Podan je pregled dosedanjih raziskav na področju odrezavanja titanovih zlitin. Opisan je potek eksperimentov in določevanja rezalnih parametrov pri frezanju s keramičnimi orodji. Glede na rezultate eksperimentov smo ugotovili, da keramična frezala trenutno še niso primerna za obdelavo titanove zlitine Ti-6Al-4V. Pri eksperimentih s karbidnimi frezali je predstavljeno načrtovanje plana eksperimentov, potek eksperimentov in obraba frezal. Zapisani so tudi rezalni parametri, s katerimi smo dosegli največjo produktivnost in hkrati čim daljšo obstojnost orodja. Analizirali in primerjali smo tudi stroške obdelave s keramičnimi in karbidnimi frezali. V zaključkih so predstavljene sklepne ugotovitve iz eksperimentov ter predlogi za nadaljnje delo.

Language:Slovenian
Keywords:produktivnost optimizacija keramična frezala karbidna frezala titan Ti-6Al-4V obstojnost orodij frezanje
Work type:Master's thesis
Typology:2.09 - Master's Thesis
Organization:FS - Faculty of Mechanical Engineering
Publisher:[L. Kastelic]
Year:2018
PID:20.500.12556/RUL-102960 This link opens in a new window
UDC:621.9.02:621.892(043.2)
COBISS.SI-ID:16424219 This link opens in a new window
Publication date in RUL:12.09.2018
Views:1233
Downloads:403
Metadata:XML RDF-CHPDL DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Secondary language

Language:English
Title:Analysis of cutting tools and parameters for increasing the productivity of milling of titanium alloy Ti-6Al-4V
Abstract:
This master thesis presents the selection process of appropriate cutting tools and optimization of cutting parameters aimed at achieving the highest possible productivity when milling the titanium alloy Ti-6Al-4V. The thesis further provides an overview of previous titanium alloys cutting research as well as description of performance of experiments and the manner of determining ceramic tools milling cutting parameters. According to the results of the experiments, we have determined that ceramic mills are at this time not yet suitable for the machining of titanium alloy Ti-6Al-4V. The planning and the performance of carbide mills experiments are presented together with details of the wear of milling tools. We have further explained cutting parameters used to simultaneously achieve the highest productivity and the maximum durability of tools. We have also analysed and compared the processing costs of ceramic and carbide mills respectively. Findings of our experiments and our suggestions for further work are presented in our conclusion herein.

Keywords:productivity optimization ceramic end milling tools carbide end milling tools titanium Ti-6Al-4V tool life milling

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back