Obdelava tankostenskih lesenih izdelkov

Avguštinčič, Žiga (author), Pušavec, Franci (mentor), Kopač, Janez (comentor)

Delo temelji na tehnološkem postopku pri klasičnem struženju tankostenskih izdelkov, ki so danes razmeroma uveljavljeni procesi, s katerimi pridemo do realnih elementov ali sklopov. Na konkretnem primeru je postavljena in analizirana tehnologija izdelave unikatnih prstanov. Cilj diplomskega dela je bil izbrati najprimernejši les in določiti najprimernejši postopek glede na izbrano tehnologijo izdelave in zahtevano kakovost končnega izdelka. V diplomskem delu je narejena primerjava obdelav šestih vrst lesa. Primerjava je potrdila začetno tezo, katere vrste lesa so primerne za tankostensko struženje. Ugotovljena je bila tudi najprimernejša vrsta lesa za tovrstno obdelavo. Najprimernejšo vrsto lesa je možno stružiti celo do debeline stene 0,25 mm. S to analizo smo izbrali primerne nehomogene materiale za obdelavo v sklopu s homogenim materialom v končnem izdelku. Na konkretnem primeru izdelave unikatnega prstana v kombinaciji titana in češnjevega lesa je bil primerjalno analiziran postopek končne obdelave sklopa med homogenim in nehomogenim materialom.

• Language: Slovenian
• Keywords: les, titan, obdelava, homogen, nehomogen, tankostensko struženje
• Work type: Bachelor thesis/paper
• Typology: 2.11 - Undergraduate Thesis
• Organization: FS - Faculty of Mechanical Engineering
• Place of publishing: Ljubljana
• Publisher: [Ž. Avguštinčič]
• Year: 2018
• Number of pages: XIX, 69 str.
• PID: 20.500.12556/RUL-101479
• UDC: 621.941:674(043.2)
• COBISS.SI-ID: 16104987
• Publication date in RUL: 07.06.2018

AVGUŠTINČIČ, Žiga, 2018, Obdelava tankostenskih lesenih izdelkov [online]. Bachelor’s thesis. Ljubljana : Ž. Avguštinčič. [Accessed 26 April 2025]. Retrieved from: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=eng&id=101479

Secondary language

• Language: English
• Title: Processing of thin-walled wooden objects

Abstract

The thesis is based on a technological procedure with regard to standard turning of thin-walled products. Nowadays, these processes are relatively established and allow us to create real elements or completed pieces. The production technique of unique rings is presented and analysed based on a specific case. The aim of the thesis was to select the most appropriate wood type and determine the most suitable process with regard to the chosen production technique and the required quality of the finished product. The thesis therefore compares the treatment of six wood types. The comparison confirmed the initial hypothesis on the most suitable types of wood for thin-walled turning. The best wood type for this technique, which can be turned to a thickness of 0.25 mm, was also set out. The analysis allowed us to choose the non-homogeneous materials that can be processed together with a homogeneous material in the finished product. The specific case of making a unique ring combining titanium and cherry wood served as a basis for comparatively analysing the final treatment of the area where both homogeneous and non-homogeneous materials are joined together.

• Keywords: wood, titanium, processing, homogeneous, non-homogeneous, thin-walled turning