1. Two step process chain for micromixer tool insert productionIzidor Sabotin, Joško Valentinčič, 2022, published scientific conference contribution Keywords: AWJ, EDM, casting PDMS, process chain, micromixers, labs on a chip Full text (file, 284,58 KB) |
2. RANS versus Scale Resolved approach for modeling turbulent flow in continuous casting of steelJurij Gregorc, Ajda Kunavar, Božidar Šarler, 2021, original scientific article Keywords: continuous casting of steel, billet, water model experiment, particle image velocimetry, computational fluid dynamics, turbulence modeling, Reynolds averaged Navier-Stokes equations, large eddy simulation, validation, PIV measurements, CFD, RANS, LES Full text (file, 3,21 MB) This document has more files! More... |
3. Numerical modelling of continuous casting of round billets with turbulence in the meltKatarina Mramor, Zlatko Rek, Robert Vertnik, Božidar Šarler, 2024, published scientific conference contribution Keywords: continuous casting of steel, CFD, turbulence modeling, meshless methods Full text (file, 974,51 KB) This document has more files! More... |
4. Multi-physics and multi-scale meshless simulation system for direct-chill casting of aluminium alloysBožidar Šarler, Tadej Dobravec, Gašper Glavan, Vanja Hatić, Boštjan Mavrič, Robert Vertnik, Peter Cvahte, Filip Gregor, Marina Jelen, Marko Petrovič, 2019, original scientific article Keywords: aluminium alloys, direct-chill casting, computational mechanics, multi-scale modelling, multi-physics modelling, meshless methods Full text (file, 2,11 MB) This document has more files! More... |
5. Predicting the fatigue life of an AlSi9Cu3 porous alloy using a vector-segmentation technique for a geometric parameterisation of the macro poresDejan Tomažinčič, Žiga Virk, Peter Kink, Gregor Jerše, Jernej Klemenc, 2021, original scientific article Keywords: AlSi9Cu3 alloy, macro porosity, vector segmentation, elliptical pore model, high-pressure die-casting Full text (file, 3,78 MB) This document has more files! More... |
6. Characterization of the AZ31/AW-6060 joint fabricated using compound casting with a Zn interlayer at relatively low temperature conditionsTomasz Bucki, Marek Konieczny, Dana Bolibruchová, Sylwia Rzepa, 2021, original scientific article Keywords: compound casting, magnesium alloys, aluminium alloys, zinc interlayer, microstructures, mechanical properties Full text (file, 5,07 MB) This document has more files! More... |
7. Meshless approach to the large-eddy simulation of the continuous casting processKatarina Mramor, Robert Vertnik, Božidar Šarler, 2022, original scientific article Keywords: large-eddy simulation, synthetic isotropic turbulence, meshless method, local radial basis function collocation, continuous casting of steel Full text (file, 17,98 MB) This document has more files! More... |
8. Simulation of macrosegregation in direct-chill castingVanja Hatić, Boštjan Mavrič, Božidar Šarler, 2020, original scientific article Keywords: direct-chill casting, macrosegregation, meshless methods, diffuse-approximate method, inlet design, realistic geometry, solidification Full text (file, 3,83 MB) This document has more files! More... |
9. Influence of Ga on the formation of phases in cast Al–Mn-based alloysIztok Naglič, Blaž Leskovar, Zoran Samardžija, Boštjan Markoli, 2021, original scientific article Keywords: casting, microstructure, X-ray diffraction, electron backscatter diffraction, scanning electron microscopy Full text (file, 10,07 MB) This document has more files! More... |
10. Heterogeneous nucleation and orientation relationships of icosahedral phase with TiB$_2$ inoculantsBlaž Leskovar, Sašo Šturm, Kemal Delijić, Julian Ledieu, Matejka Podlogar, Sandra Drev, Iztok Naglič, Boštjan Markoli, 2023, original scientific article Keywords: aluminium alloys, casting, heterogeneous nucleation, orientation relationship, icosahedral quasicrystals Full text (file, 10,17 MB) This document has more files! More... |