Zasnova, izdelava in programiranje signirnega stroja

NAGLIČ, NIKO (avtor), Logar, Vito (mentor)

V diplomskem delu je predstavljena podrobna izgradnja signirnega stroja. Signator je naprava, ki signira oziroma označuje določen tekst ali grafiko na določeno površino. V proizvodnji industriji, kjer se izdelujejo izdelki, morajo le-te imeti svojo kodo. Ta koda je lahko šifra izdelka, datum izdelave ali pa kakšen drug podatek. Napis je lahko narejen ţe v kalupu izdelka, ali pa je napisan naknadno z laserjem, signatorjem, ali kakšno drugo metodo. V obravnavanem primeru je nekaj šifer ţe napisanih v kalupu izdelka, tako da je bil napis ţe na odlitku, eno kodo pa signirni stroj napiše še naknadno. Naloga signirnega stroja je, da izdelek vpne v leţišče, ter z vgrajenim signatorjem na izdelek napiše njegovo kodo. Narejen je za 2 različna kosa – levi in desni. S senzorjem stroj zazna kateri kos je v stroju in nato signira kodo za levi ali desni kos. V diplomskem delu smo opisali detajlno sestavo stroja. Predstavljene so vse komponente in njihovo delovanje, ter program.

• Jezik: Slovenski jezik
• Ključne besede: signator, programirljivi logični krmilnik, pnevmatika
• Vrsta gradiva: Diplomsko delo/naloga
• Organizacija: FE - Fakulteta za elektrotehniko
• Leto izida: 2017
• PID: 20.500.12556/RUL-96746
• Datum objave v RUL: 13.10.2017

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Design, development and programming of the signing machine

Izvleček

The thesis describes design, construction, manfacturing and programming of the signifier machine. A signer is a device that signifies or denotes a particular text or graphics on a particular surface. In the manufacturing industry, where different products are manufactured, each product needs to have its own code. The code can be product code, date of manufacture or any other data. The signing can already be made in the mold of the product, or can subsequently be written with a laser, a signer, or some other method. In our case, some things have already been written in the mold of the product, so the inscription was already on the product and only one code has to be written by the signifier afterwards. The task of the signifier is to fix the product into the bed, and write the code on the product with the built-in signer. It is made for 2 different pieces - left and right. Sensor detects which piece is present and indicates the code for the left or the right piece. In the thesis I described the composition of the machine, including a detailed presentation of all components, their operation and a PLC program.

• Ključne besede: signer, program logic controller, pneumatic