Robotska celica za sestavljanje vzorcev iz majhnih ploščic

Kastrevc, David Dušan (avtor), Herakovič, Niko (mentor), Šimic, Marko (komentor)

Zaključna naloga obsega izdelavo robotske celice za sestavljanje vzorcev iz malih ploščic in predvsem določitev časa montažnih operacij za izdelavo omenjenega vzorca. Izhodiščni koncept robotske celice že obstaja vendar je potrebno izdelati nove mehanske komponente, novo robotsko prijemalo, sprogramirati ustrezen delovni cikel robota in analizirati njegovo delovanje. Ker področje zajema strego in montažo ter robotiko so v prvem delu naloge predstavljene teoretične osnove. V nadaljevanju je podrobneje predstavljena struktura izdelka, ki je osnova za izdelavo strukture montažnih operacij in programa delovnega cikla robota. Naloga obsega tudi snovanje in izdelavo novega zalogovnika sestavnih delov in izdelavo robotskega prijemala. Zaključni, pomembnejši, del naloge predstavlja analitičen izračun časa montažnih operacij in primerjava z dejanskim izmerjenim časom montažnih operacij.

• Jezik: Slovenski jezik
• Ključne besede: strega in montaža, robotika, programiranje robotov, sestavljanje vzorca, zalogovnik
• Vrsta gradiva: Diplomsko delo/naloga
• Organizacija: FS - Fakulteta za strojništvo
• Leto izida: 2017
• PID: 20.500.12556/RUL-95526
• Datum objave v RUL: 20.09.2017

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Robotic cell for pattern assembly constructed of small tiles

Izvleček

The thesis covers the production of a robotic cell for the assembly of patterns constructed of small tiles and in particular the determination of the time of assembly operations for producing of the mentioned patterns. The starting robotic cell concept allready exists, however it is necessary to produce new mechanical components, a new robotic gripper, to program an appropriate robot working cycle and analyze its functioning. Since the field covers handling and assembly as well as robotics, theoretical bases of the mentioned areas are presented in the first part of the paper. Following, a more detailed description of the product structure, which is the basis for the creation of the assembly operations structure and the robot working cycle program is described in detail. The thesis also includes the design and construction of a new buffer for parts and the construction of a robot gripper. The final, more important, part of the thesis presents an analytical calculation of the time of assembly operations and a comparison with the actual measured time of assembly operations.

• Ključne besede: handling and assembly, robotics, programming of robots, pattern assembly, buffer