Prikaz postopkov pridobivanja gradbenega in uporabnega dovoljenja za rekonstrukcijo industrijskega objekta

Škrabec Šešok, Metka (author), Šubic-Kovač, Maruška (mentor)

V diplomski nalogi sem opisala potek dela pri pripravi projektne dokumentacije, ki jo je v skladu z veljavnimi predpisi potrebno izdelati za pridobitev gradbenega in nato uporabnega dovoljenja za obravnavani primer, ki je obsegal spremembo dela prostorov v industrijski dvorani, ki je bila zgrajena za potrebe lesnopredelovalne industrije, in sicer za novo dejavnost, tj. opravljanje avtomehaničnih storitev. Pri tem je bilo potrebno z rekonstrukcijskimi deli prilagoditi prostore za to novo dejavnost. Nalogo sem razdelila v več poglavij, v katerih sem opisala načrte in potek izdelave projektne dokumentacije, postopek pridobivanja gradbenega dovoljenja in nato uporabnega dovoljenja ter svoja opažanja. Pri vsakem poglavju sem najprej prikazala osnovna zakonska določila, ki veljajo za posamezno fazo dela, nato sem poskušala čim natančneje opisati dokumentacijo, ki smo jo pripravili za naš primer, da smo zadostili tem zakonskim določilom. Tako v nalogi kot na terenu sem skušala še opozoriti na probleme, na katere smo naleteli med delom oziroma sem jih opazila pri pridobivanju ustreznih dovoljenj za uporabo objekta s strani pristojnega državnega upravnega organa.

• Language: Slovenian
• Keywords: gradbeno dovoljenje, uporabno dovoljenje, projektna dokumentacija, ZGO-1
• Work type: Undergraduate thesis
• Typology: 2.11 - Undergraduate Thesis
• Organization: FGG - Faculty of Civil and Geodetic Engineering
• Place of publishing: Ljubljana
• Publisher: [M. Škrabec Šešok]
• Year: 2016
• PID: 20.500.12556/RUL-84332
• UDC: 351.778.511(497.4)(043.2)
• COBISS.SI-ID: 7565409
• Publication date in RUL: 19.08.2016

Secondary language

• Language: English
• Title: Procedures in acquiring building and usage permit for reconstruction of an industrial building

Abstract

In my thesis I have described the course of work at preparing the project documentation which in accordance with valid regulations needs to be made for the acquirement of building permit and usage permit for the case I have been studying, which contained a change of part of places in the industrial hall which was built to meet the needs of wood processing industry for a new activity, the performance of car mechanical services. The facilities for the new activity needed to be adjusted by using reconstruction parts. The thesis has been divided into several chapters in which I have described the process of making the project documentation, the process of acquiring the building and later usage permit and also my personal observations on the matter. In each chapter I have first presented the basic legal provisions, which are required for each phase of work, and then I have tried to carefully describe the documentation which has been prepared for the studied case so that the legal provisions were met. Furthermore, I have also pointed out the problems I have run into while working on the above mentioned case, especially problems I have noticed in acquiring the necessary permits from the legal state administrative body for the usage of building.

• Keywords: building permit, usage permit, project documentation, ZGO-1