Delovanje predstikalnih naprav za nizkotlačne in visokotlačne sijalke

AVSEC, ZDRAVKO (author), Bizjak, Grega (mentor)

Žarnica na žarilno nitko je bila ena izmed prvih uporabnih električnih svetlobnih virov. Za svoje delovanje potrebuje le priključitev na omrežje. Njena največja slabost je slab svetlobni izkoristek, saj se v vidno svetlobo spremeni le okoli 10 % električne energije, ostali delež predstavlja toplota. [1] Iskanje novih električnih svetlobnih virov, ki bi imeli boljše svetlobne izkoristke od žarnice, je pripeljalo do razvoja sijalk in kasneje svetlečih diod. Sijalke in svetleče diode zaradi svojih obratovalnih zakonitosti za svoje delovanje potrebujejo predstikalne naprave oz. napajalnike. Cilj diplomskega dela je predstaviti različne vrste predstikalnih naprav za nizkotlačne in visokotlačne sijalke kot tudi napajalnikov svetlečih diod. V preteklosti so predstikalne naprave delovale na principu magnetnih tokokrogov, v današnjem času pa se za delovanje raznovrstnih tipov sijalk vse več uporablja elektronske predstikalne naprave. Z razvojem vedno bolj v razsvetljavi uporabljenih svetlečih diod, je prišlo tudi do razvoja napajalnikov za le-te. V diplomski nalogi so na enostaven način predstavljeni različni tipi predstikalnih naprav in napajalnikov svetlečih diod. Prav tako so opisani principi njihovega delovanja in različni principi regulacije svetlobnega toka.

• Language: Slovenian
• Keywords: elektromagnetna predstikalna naprava, elektronska predstikalna naprava, sijalke, svetleče diode, napajalnik svetlečih diod
• Work type: Undergraduate thesis
• Organization: FE - Faculty of Electrical Engineering
• Year: 2016
• PID: 20.500.12556/RUL-83810
• Publication date in RUL: 30.06.2016

Secondary language

• Language: English
• Title: Operation of ballasts for low pressure and high pressure lamps

Abstract

Incandescent light bulb was one of the first applied electric light sources in history. In order to work, it requires only a power supply voltage. Its main weakness is poor luminous efficiency, because only about 10 % of the electricity is transferred into light. The remaining energy is lost as heat. [1] Finding new electric light sources, which have better light efficiency than incandescent light bulbs led to the development of gas discharge lamps and light-emitting diodes later. Gas discharge lamps and light-emitting diodes require suitable ballasts or LED drivers in order to be in line with operation regulations. The aim of this thesis is to present different types of ballasts for discharge lamps and power supplies for LEDs. In the past, ballasts operated on the principle of magnetic circuits, today, for the operation of a variety of lamp types electronic ballasts are increasingly used. Along with the development of LEDs, also suitable drivers for them were invented. The thesis gives an overview on different types of ballasts and power supplies for LEDs. It also describes the principles of their operation and the various principles of regulation of the luminous flux.

• Keywords: ballast, electronic ballast, fluorescent lamp, gas discharged lamps, LEDs, LEDs driver