izpis_h1_title_alt

Water uptake of thermally modified Norway spruce
ID Žlahtič, Mojca (Avtor), ID Thaler, Nejc (Avtor), ID Humar, Miha (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (1,05 MB)
MD5: 983C4AC128F29D5FAA7D4375EB6AB5EB
PID: 20.500.12556/rul/fe0ad429-cb61-4927-8284-c256b0bc94d3
URLURL - Predstavitvena datoteka, za dostop obiščite http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=221863 Povezava se odpre v novem oknu

Izvleček
Thermal modification of wood has been commercially available for almost twenty years but the complete mechanism of improved durability is still not completely understood. It is known that the temperature and duration of the modification influences the properties of the final products. There are several potential reasons for the increased durability of the modified wood. In recent research in particular, water exclusion efficiency has been identified as one of the key mechanisms. In order to elucidate this presumption, specimens made of Norway spruce heartwood were thermally modified at 6 different temperatures (160 °C, 180 °C, 190 °C, 200 °C, 210 °C and 230 °C) for three hours according to the Silvapro procedure. Control specimens were left unmodified. Three sets of tests were performed: (a) samples were soaked in water for 4 days and then positioned on load cells and allowed to dry until a constant mass was achieved; (b) short term water uptake was determined with a tensiometer and (c) wood-water interactions were verified using constant gravimetric moisture measurement during outdoor exposure. As expected, the degree of modification was reflected in the moisture content of the wood during testing. Short and medium term water uptakes correlated quite well with the performance of wood in outdoor applications. On the other hand, long term tensiometer measurements were not in line with either short term water uptake or outdoor measurements.

Jezik:Hrvaški jezik
Ključne besede:Picea abies, merilna celica, tenziometer, termična modifikacija, navzem vode, terenska testiranja
Vrsta gradiva:Delo ni kategorizirano
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:BF - Biotehniška fakulteta
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2015
Št. strani:Str. 273-279
Številčenje:Let. 66, št. 4
PID:20.500.12556/RUL-82446 Povezava se odpre v novem oknu
UDK:630*813.13
ISSN pri članku:0012-6772
DOI:10.5552/drind.2015.1421 Povezava se odpre v novem oknu
COBISS.SI-ID:2479241 Povezava se odpre v novem oknu
Datum objave v RUL:25.05.2016
Število ogledov:1912
Število prenosov:423
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Drvna industrija : Znanstveno stručni časopis za pitanja drvne tehnologije
Skrajšan naslov:Drv. ind.
Založnik:Šumarski fakultet Sveučilišta u Zagrebu, Hrvatsko šumarsko društvo, Croatiadrvo, d. d., Exportdrvo, p. o.
ISSN:0012-6772
COBISS.SI-ID:2858754 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Angleški jezik
Naslov:Upijanje vode toplinski modificirane norveške smreke

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P4-0015
Naslov:Les in lignocelulozni kompoziti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:L4-5517
Naslov:Preprečevanje vlaženja lesa, kot merilo učinkovitosti zaščite lesa pred glivami razkrojevalkami

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj