In this thesis, we represented the control analysis of the landing hill profile in Planica's Bloudek
large ski jumping hill. The more detailed analysis was made on the upper part of the landing
hill profile, where minor damage was supposed to appear. The analysis of the control shape
of the jumping hill was made by laser scanning the landing slope and thus forming a point
cloud. In the thesis, we describe the measuring procedure, and which measuring equipment
was used, as well as the processing of the attained data. Most of the results were calculated
by comparing the projected dimensions and shapes with the dimensions defined from the point
cloud. We have determined that the profile of the jumping hill axis deviates to a maximum 4
centimetres in height, and, that the construction collapsed 6 centimetres in the direction of the
normal level on the damaged area.
|
