Priklop perifernih naprav na Raspberry Pi : diplomsko delo

Fabčič, Simon (author), Šter, Branko (mentor)

Moje diplomsko delo obravnava povezovanje perifernih naprav na Raspberry Pi. Najprej je predstavljena oprema, ki sem jo potreboval pri pisanju. Kot glavno strojno opremo sem uporabil enoploščni računalnik Raspberry Pi (model B) in nanj namestil operacijski sistem Raspbian. Na njem je bilo že pred naloženo razvojno okolje za programski jezik Python, ki sem ga tudi uporabljal. Nato sem prikazal, kako na Raspberry Pi na različne načine in prek raznih protokolov povežemo periferne naprave ter digitalne senzorje. Diplomska naloga je sestavljena tako, da je za vsak način priklopa najprej opisan protokol prenosa podatkov, električna vezalna shema z opisom, potrebne nastavitve na Raspberry Pi-ju in Python 3.x programska koda, ki omogoči komunikacijo z oddaljenimi napravami. Poleg opisa priklopa enostavnega vhoda (tipka) in izhoda (LED dioda) sem priključil še naprave na vodila I2C, 1Wire, UART in SPI.

• Language: Slovenian
• Keywords: Raspberry Pi, Python 3, I2C bit banging, 1 Wire, UART, SPI, računalništvo, visokošolski strokovni študij, računalništvo in informatika, diplomske naloge
• Work type: Bachelor thesis/paper
• Typology: 2.11 - Undergraduate Thesis
• Organization: FRI - Faculty of Computer and Information Science
• Publisher: [S. Fabčič]
• Year: 2014
• Number of pages: 35 str.
• PID: 20.500.12556/RUL-68677
• UDC: 004.9(043.2)
• COBISS.SI-ID: 10698324
• Publication date in RUL: 10.07.2015

Secondary language

• Language: English
• Title: Connecting peripheral devices to Raspberry P

Abstract

My thesis deals with connecting peripheral devices to the Raspberry Pi. At first I presents the equipment I needed for programming. For the general hardware I used the single-board Raspberry Pi (model B) and installed the Raspbian operating system. There was a development environment for the Python programming language already installed on the computer, which I used. In the subsequent passages I presented how to connect the Raspberry Pi with peripheral devices and digital sensors using different ways and various protocols. This thesis is composed in such a way that there is first described for each type of connection the data transmission protocol, electrical wiring diagram with a description, the necessary settings for the Raspberry Pi-Rom, and the Python 3.x software code which enables communication with remote devices. Besides the description of the connection of the simple input (button) and output (LED diode), I added devices on the I2C bus, 1Wire, UART and SPI.

• Keywords: Raspberry Pi, Python 3, I2C bit banging, 1 Wire, UART, SPI, computer science, computer and information science, diploma