izpis_h1_title_alt

Geosynthetic-encased stone columns - analytical calculation model
ID Pulko, Boštjan (Avtor), ID Majes, Bojan (Avtor), ID Logar, Janko (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (1,15 MB)
MD5: 70C015989527C50C004BF5C6C1B18F77
PID: 20.500.12556/rul/340eb8d1-5b12-4827-a710-85aad32c7dfc

Izvleček
This paper presents a newly developed design method for non-encased and encased stone columns. The developed analytical closed-form solution is based on previous solutions, initially developed for non-encased columns and for non-dilating rigid-plastic column material. In the present method, the initial stresses in the soil/column are taken into account, with the column considered as an elasto-plastic material with constant dilatancy, the soil as an elastic material and the geosynthetic encasement as a linear-elastic material. To check the validity of the assumptions and the ability of the method to give reasonable predictions of settlements, stresses and encasement forces, comparative elasto-plastic finite element analyses have been performed. The agreement between the two methods is very good, which was the reason that the new method was used to generate a parametric study in order to investigate various parameters, such as soil/column parameters, replacement ratio, load level and geosynthetic encasement stiffness on the behaviour of the improved ground. The results of this study show the influence of key parameters and provide a basis for the rational predictions of settlement response for various encasement stiffnesses, column arrangements and load levels. The practical use of the method is illustrated through the design chart, which enables preliminary selection of column spacing and encasement stiffness to achieve the desired settlement reduction for the selected set of the soil/column parameters. (C) 2010 Elsevier Ltd. All rights reserved.

Jezik:Angleški jezik
Ključne besede:soil improvement stone, columns, geosynthetic, encasement, settlement, prediction, elastoplastic solution
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FGG - Fakulteta za gradbeništvo in geodezijo
Založnik:Elsevier
Leto izida:2010
Št. strani:Str. 29-39
Številčenje:Letn. 29, št. 1
PID:20.500.12556/RUL-32133 Povezava se odpre v novem oknu
UDK:624.131
ISSN pri članku:0266-1144
DOI:10.1016/j.geotexmem.2010.06.005 Povezava se odpre v novem oknu
COBISS.SI-ID:5133409 Povezava se odpre v novem oknu
Datum objave v RUL:10.07.2015
Število ogledov:5042
Število prenosov:1116
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Geotextiles and geomembranes
Skrajšan naslov:Geotext. geomembr.
Založnik:Elsevier Applied Science Publishers
ISSN:0266-1144
COBISS.SI-ID:9551621 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Angleški jezik
Ključne besede:izboljšava tal, gruščnati slopi, geosintetiki, napoved posedanja, elasto-plastična rešitev

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj