izpis_h1_title_alt

Target-drift seismic-force-based design of one-story reinforced concrete precast buildings considering the requirements of the second generation of the Eurocode 8 standard
ID Isaković, Tatjana (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (3,89 MB)
MD5: FC62A185E44749F477F4D8CBB3F83A40
URLURL - Izvorni URL, za dostop obiščite https://onlinelibrary.wiley.com/doi/10.1002/eqe.4260 Povezava se odpre v novem oknu

Izvleček
Results are presented concerning the force-based design of a wide range of reinforced concrete, single-story precast buildings, considering the requirements of the new Eurocode 8 standard. The relevant criterion defining the cross-sectional dimensions of the columns was the 2% drift limitation. Buildings were designed considering a behavior factor of 3 and a 50% reduction in stiffness corresponding to the gross cross-section. The design evaluation, using a nonlinear pushover analysis, revealed that all the buildings could expect approximately twice the drift considered in the design with significant second-order effects, particularly in very tall columns. The main reasons for large discrepancies between the elastic and nonlinear analyses were the arbitrarily selected behavior factor and the arbitrarily selected reduction in stiffness corresponding to the gross cross-section (the stiffness considered in the design was approximately double what the nonlinear analysis revealed). The analysis revealed that these two quantities are closely correlated. Once the dimensions of the columns had been selected, the force and initial stiffness reduction could not be chosen arbitrarily. Correlations were determined between the column dimensions, theoretical stiffness reduction, seismic force reduction (behavior factor) and second-order effects. From these correlations, a new target-drift force-based design methodology was proposed. All considered buildings were redesigned using the proposed method. The results of the new design and the nonlinear-pushover-based analysis correlated well.

Jezik:Angleški jezik
Ključne besede:force-based design, new Eurocode 8, nonlinear analysis, RC precast buildings, target-drift design, civil engineering
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FGG - Fakulteta za gradbeništvo in geodezijo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2025
Št. strani:Str. 319–345
Številčenje:Vol. 54, iss. 1
PID:20.500.12556/RUL-165621 Povezava se odpre v novem oknu
UDK:624.04
ISSN pri članku:1096-9845
DOI:10.1002/eqe.4260 Povezava se odpre v novem oknu
COBISS.SI-ID:212722435 Povezava se odpre v novem oknu
Datum objave v RUL:10.12.2024
Število ogledov:89
Število prenosov:263
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Earthquake engineering and structural dynamics
Skrajšan naslov:Earthquake eng. struct. dyn.
Založnik:Wiley, International Association for Earthquake Engineering
ISSN:1096-9845
COBISS.SI-ID:512816153 Povezava se odpre v novem oknu

Licence

Licenca:CC BY-NC 4.0, Creative Commons Priznanje avtorstva-Nekomercialno 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-nc/4.0/deed.sl
Opis:Licenca Creative Commons, ki prepoveduje komercialno uporabo, vendar uporabniki ne rabijo upravljati materialnih avtorskih pravic na izpeljanih delih z enako licenco.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:gradbeništvo, projektiranje po metodi sil, novi Evrokod 8, nelinearna analiza, AB montažne konstrukcije, projektiranje glede na ciljni pomik

Projekti

Financer:ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
Številka projekta:P2-0185
Naslov:Potresno inženirstvo

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj