izpis_h1_title_alt

Parametric analysis of hybrid elastocaloric – ▫$CO_2$▫ cooling system
ID Nebot-Andrés, Laura (Avtor), ID Petruzziello, Fabio (Avtor), ID Aprea, Ciro (Avtor), ID Llopis, Rodrigo (Avtor), ID Žerovnik, Andrej (Avtor), ID Maiorino, Angelo (Avtor), ID Tušek, Jaka (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (1,56 MB)
MD5: 8AFA0FBA2B9128B5DAA3821FA29615CC
URLURL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S1359431124015114 Povezava se odpre v novem oknu

Izvleček
This study examines the potential application of elastocaloric refrigeration (eC) technology for the subcooling of ▫$CO_2$▫ in transcritical single-stage refrigeration cycles. Elastocaloric refrigeration, a solid-state refrigeration technology, possesses significant untapped potential due to its environmentally friendly characteristics, primarily its lack of harmful operational fluids. However, its direct stand-alone application has been limited due to the relatively small temperature spans produced by current proof-of-concept elastocaloric devices. Efforts of the scientific community have focused on extending the temperature difference that eC systems can provide, while this work offers an alternative to that challenge, offering an application solution for the current state of technology. The study proposes for the first-time a unique integration of eC technology and ▫$CO_2$▫ cooling systems, aiming to capitalise on the respective weaknesses of these technologies and transform them into strengths. In the proposed solution, an eC device operates as an external agent to subcool ▫$CO_2$▫, with the objective of enhancing the energy performance of the refrigeration system. This concept is motivated by the recent advancements in ▫$CO_2$▫ cooling systems and the growing recognition of subcooling as a promising method to boost the performance of such systems. The hybrid system’s performance was evaluated across various ambient temperatures, ranging from 20 ◦C to 35 ◦C, and at an evaporating level of -15 ◦C. It is evaluated by means of a calculation model based on the data obtained experimentally from an elastocaloric regenerator and an experimental ▫$CO_2$▫ plant. The system‘s energy efficiency was analysed in comparison to a non-subcooled ▫$CO_2$▫ cycle, and a third cycle comprising both eC subcooling and an expander for energy recovery from the expansion process. The results demonstrated a considerable increase in the coefficient of performance (COP) with the use of eC subcooling: increments of 2.7 % at 20 ◦C, 4.5 % at 25 ◦C, 9.6 % at 30 ◦C and 13.1 % at 35 ◦C, where more significant increments were observed at higher ambient temperatures. The eC Subcooler with expander reaches increments of 7.5 %, 11.1 %, 18.1 % and 22.2 % respectively. Additionally, the eC subcooler allowed a reduction in the optimum gas-cooler pressure by up to 5 bar at the highest environment temperature. Despite these promising results, the study underscores the necessity for further optimisation and improvement of elastocaloric devices. Additionally, it emphasizes the importance of energy recovery strategies from the expansion process in transcritical ▫$CO_2$▫ cooling system.

Jezik:Angleški jezik
Ključne besede:carbon dioxide, elastocaloric, subcooling, modelling, optimization
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2024
Št. strani:10 str.
Številčenje:Vol. 253, art. 123843
PID:20.500.12556/RUL-161269-f46ed55a-f866-bafb-b54d-d4bffd938150 Povezava se odpre v novem oknu
UDK:621.56:546.264-31
ISSN pri članku:1359-4311
DOI:10.1016/j.applthermaleng.2024.123843 Povezava se odpre v novem oknu
COBISS.SI-ID:206758147 Povezava se odpre v novem oknu
Datum objave v RUL:09.09.2024
Število ogledov:75
Število prenosov:44
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Applied thermal engineering
Skrajšan naslov:Appl. therm. eng.
Založnik:Elsevier Science
ISSN:1359-4311
COBISS.SI-ID:1861910 Povezava se odpre v novem oknu

Licence

Licenca:CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
Opis:Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:ogljikov dioksid, elastokalorični učinek, podhlajevanje, modeliranje, optimizacija

Projekti

Financer:EC - European Commission
Program financ.:NextGenerationEU, PRTR
Številka projekta:TED2021-130162B-I00

Financer:Drugi - Drug financer ali več financerjev
Program financ.:University of Ljubljana
Naslov:Razvoj prototipa hibridne elastokalorične in parno-kompresorske toplotne naprave
Akronim:FutureECOool

Financer:Drugi - Drug financer ali več financerjev
Program financ.:Ministerio de Ciencia e Innovacóin of Spain
Številka projekta:PID2021126926OB-C21

Financer:Drugi - Drug financer ali več financerjev
Program financ.:University of Ljubljana
Številka projekta:820-1/2020-34

Financer:ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
Številka projekta:P2-0422
Naslov:Funkcionalne tekočine za napredne energetske sisteme

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj