izpis_h1_title_alt

Lubrication of polyphthalamide (PPA) and polyetheretherketone (PEEK) with biodegradable synthetic esters : effects of base oil polarity, temperature and polymer aging
ID Ferreira, Pedro Martins (Author), ID Arnoux, Quentin (Author), ID Charrin, Catherine (Author), ID Trindade, Bruno (Author), ID Kalin, Mitjan (Author)

.pdfPDF - Presentation file, Download (6,93 MB)
MD5: B6A7FEF95D2C6AE2E1427335C24BCF20
URLURL - Source URL, Visit https://www.sciencedirect.com/science/article/pii/S0301679X24009095 This link opens in a new window

Abstract
This study aims to evaluate the tribological behavior of polyphthalamide (PPA) and polyetheretherketone (PEEK) lubricated with biodegradable synthetic esters. Tribological tests were performed at 23 °C and 100 °C with new and aged samples to assess the effects of increased temperature and polymer aging on friction and wear. The results of tests at room temperature and the SEM images of the wear scars show that synthetic esters provide better wear resistance to PEEK than synthetic mineral oil (polyalphaolefin, PAO). FTIR and XPS analyses suggest the formation of a physisorbed protective film by the esters. Trimethylolpropane-based ester (TMP) was shown to adsorb better to both polymers than propylene glycol-based ester (PG), but this did not translate into a better tribological performance. When compared to room temperature, tests at 100 °C showed a higher wear coefficient for both polymers, irrespective of the oil. However, the friction coefficient increased for PEEK due to a higher adhesion, while it decreased for PPA because of the material’s softening. The aging of samples at 100 °C degraded the tribological performance of the polymers, especially aging in PG ester, which caused an increase in friction for PEEK and an increase in friction and wear for PPA. PG ester was found to have caused oxidation of both polymers to a greater extent than PAO or TMP ester.

Language:English
Keywords:tribology, polyetheretherketone, polyphthalamide, synthetic esters, PAO, adsorption
Work type:Article
Typology:1.01 - Original Scientific Article
Organization:FS - Faculty of Mechanical Engineering
Publication status:Published
Publication version:Version of Record
Year:2024
Number of pages:13 str.
Numbering:Vol. 200, art. 110157
PID:20.500.12556/RUL-160657 This link opens in a new window
UDC:539.92:678.7
ISSN on article:0301-679X
DOI:10.1016/j.triboint.2024.110157 This link opens in a new window
COBISS.SI-ID:206062083 This link opens in a new window
Publication date in RUL:02.09.2024
Views:245
Downloads:42
Metadata:XML DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Record is a part of a journal

Title:Tribology international
Shortened title:Tribol. int.
Publisher:Elsevier
ISSN:0301-679X
COBISS.SI-ID:26558976 This link opens in a new window

Licences

License:CC BY-NC-ND 4.0, Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
Link:http://creativecommons.org/licenses/by-nc-nd/4.0/
Description:The most restrictive Creative Commons license. This only allows people to download and share the work for no commercial gain and for no other purposes.

Secondary language

Language:Slovenian
Keywords:tribologija, polietereterketon, poliftalamid, sintetični estri, PAO, adsorpcija

Projects

Funder:EC - European Commission
Funding programme:H2020
Project number:860246
Name:GreenTRIBOS
Acronym:GreenTRIBOS

Funder:ARIS - Slovenian Research and Innovation Agency
Project number:P2-0231
Name:Tribologija

Funder:FCT - Fundação para a Ciência e a Tecnologia, I.P.
Project number:UIDB/00285/2020

Funder:FCT - Fundação para a Ciência e a Tecnologia, I.P.
Funding programme:6817 - DCRRNI ID
Project number:LA/P/0112/2020
Name:Advanced Production and Intelligent Systems
Acronym:ARISE

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back