Preskušanje in klasifikacija materiala po standardu IEC 60695-2

Lesjak, Primož (author), Žemva, Andrej (mentor)

V tem magistrskem delu so povzeti štirje deli standarda za preskušanje z žarečo žico in predstavljeni rezultati preskusov po opisanih metodah. Zajeti deli so IEC 60695 2 10, IEC 60695 2 11, IEC 60695 2 12 in IEC 60695 2 13. Na začetku dela so opisane zahteve vseh delov standarda in predstavljena testna naprava in testna procedura. V nadaljevanju so predstavljene tudi zahteve za predpripravo vzorcev, validacijo naprave in izvedbo preskušanja. V praktičnem delu so predstavljeni vzorci za preskušanje, opisan postopek preskušanja in povzeti dobljeni rezultati. Oba vzorca, preskušana po IEC 60695-2-11, sta v skladu z zahtevami, ki so določene za končno napravo. Ostala dva materiala, preskušana po IEC 60695-2-12 in IEC 60695-2-13, sta bila klasificirana po obeh standardih.

• Language: Slovenian
• Keywords: žareča žica, material, standard, testna naprava
• Work type: Master's thesis/paper
• Typology: 2.09 - Master's Thesis
• Organization: FE - Faculty of Electrical Engineering
• Year: 2024
• PID: 20.500.12556/RUL-160416
• COBISS.SI-ID: 209004291
• Publication date in RUL: 28.08.2024

Secondary language

• Language: English
• Title: Testing and classification of material according to standard IEC 60695-2

Abstract

In this thesis, the four parts of the standard for filament testing are summarized and the results of tests according to the described methods are presented. Parts covered are IEC 60695-2-10, IEC 60695-2-11, IEC 60695-2-12 and IEC 60695-2-13. At the beginning of document, the requirements of all parts of the standard are described and the test device and test procedure are presented. Later the requirements for preconditioning of samples, device validation and testing are also presented. In the practical part, the samples for testing are presented, the testing procedure is described, and the obtained results are summarized. Both samples, tested according to IEC 60695-2-11, comply with the requirements specified for the final device. The other two materials were tested according to IEC 60695-2-12 and IEC 60695-2-13 and were classified according to both standards.

• Keywords: glow-wire, material, standard, test apparatus