Technological optimization and fatigue evaluation of carbon reinforced polyamide 3D printed gears

Hriberšek, Matija (avtor), Kulovec, Simon (avtor), Ikram, Awais (avtor), Kern, Matjaž (avtor), Kastelic, Luka (avtor), Pušavec, Franci (avtor)

Nowadays, this is even more challenging while additive manufacturing technology is used for prototyping, as well as the production of gearing systems. Presented is an optimization and characterization of the additively manufactured (AM) gears made of carbon-reinforced polyamide material in correlation to conventional polymer gearings. Based on the obtained results, the fatigue life data for AM carbon-reinforced Polyamide gears is calculated and compared to traditionally produced Polyamide 66-based gears. Results show that the durability of AM-produced carbon-reinforced Polyamide gears can be compared to conventional-produced Polyamide 66-based gears. Furthermore, deduced that wear of the AM-reinforced Polyamide teeth, can be closely connected with the meshing temperature in correlation with fatigue.

• Jezik: Angleški jezik
• Ključne besede: gears, additive manufacturing, onyx, polyamide, carbon fibers, temperature, wear, fatigue life
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: 16 str.
• Številčenje: Vol. 10, iss. 13, [article no.] e34037
• PID: 20.500.12556/RUL-159515
• UDK: 621.83:620.193.95
• ISSN pri članku: 2405-8440
• DOI: 10.1016/j.heliyon.2024.e34037
• COBISS.SI-ID: 201477635
• Datum objave v RUL: 11.07.2024

Gradivo je del revije

• Naslov: Heliyon
• Založnik: Elsevier
• ISSN: 2405-8440
• COBISS.SI-ID: 21607432

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: zobniki, aditivne tehnologije, onyx, poliamid, karbonska vlakna, temperatura, obraba, utrujenost

Projekti

• Financer: ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
• Številka projekta: P2-0266
• Naslov: Napredne izdelovalne tehnologije za visoko kakovostno in trajnostno proizvodnjo

• Financer: Drugi - Drug financer ali več financerjev
• Program financ.: European Regional Development Fund
• Številka projekta: C3330-18-952014
• Naslov: Grant no.