On the importance of the experimental setup design in hydrodynamic journal bearing friction measurement

Gosar, Aleš (avtor), Klemenc, Jernej (avtor), Nagode, Marko (avtor), Oman, Simon (avtor)

Improving operating conditions and reducing the friction-related power losses of hydrodynamic journal bearings could lower emissions and contribute to efforts for a faster green transition. Experimental studies play an important role in evaluating and improving the performance of plain journal bearings. The concept of the experimental setup for friction measurements of journal bearings is well defined in the relevant standards, but the actual design is always left to the researchers conducting a particular study. Our study reveals that common practical assumptions about the frictional power losses caused by components of the experimental setup can lead to misleading conclusions about the measured coefficient of friction. The research premises were tested on the developed experimental setup using two methods for measuring the coefficient of friction and different load interfaces. In particular, the direct torque measurement using strain gauges on the shaft demonstrated the strongest correlation with theoretical values. However, the result was affected by the correct evaluation of the frictional losses of the support ball bearings. Conversely, the Stribeck curves showed that the combination of the indirect cantilever method and load interface with direct radial force application led to inferior results. The intricate interactions between setup components and unknown frictional conditions made straightforward geometric corrections challenging. The study encourages researchers in the field to critically assess their experimental setups and to rely on their own assessment of frictional losses.

• Jezik: Angleški jezik
• Ključne besede: plain journal bearing, coefficient of friction, frictional torque, experimental setup
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: 13 str.
• Številčenje: Vol. 197, art. 109800
• PID: 20.500.12556/RUL-158197
• UDK: 539.92:531.4:621.8
• ISSN pri članku: 0301-679X
• DOI: 10.1016/j.triboint.2024.109800
• COBISS.SI-ID: 196777987
• Datum objave v RUL: 29.05.2024

Gradivo je del revije

• Naslov: Tribology international
• Skrajšan naslov: Tribol. int.
• Založnik: Elsevier
• ISSN: 0301-679X
• COBISS.SI-ID: 26558976

Licence

• Licenca: CC BY-NC 4.0, Creative Commons Priznanje avtorstva-Nekomercialno 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by-nc/4.0/deed.sl
• Opis: Licenca Creative Commons, ki prepoveduje komercialno uporabo, vendar uporabniki ne rabijo upravljati materialnih avtorskih pravic na izpeljanih delih z enako licenco.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: drsni ležaji, eksperimentalno vrednotenje, koeficient trenja, preizkuševališče

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: P2-0182
• Naslov: Razvojna vrednotenja