izpis_h1_title_alt

Environmentally friendly protection of European beech against fire and fungal decay using a combination of thermal modification and mineralisation
ID Repič, Rožle (Author), ID Pondelak, Andreja (Author), ID Kržišnik, Davor (Author), ID Humar, Miha (Author), ID Knez, Nataša (Author), ID Knez, Friderik (Author), ID Sever Škapin, Andrijana (Author)

.pdfPDF - Presentation file, Download (2,84 MB)
MD5: 329319DBF9EDC95477900E5743FEE7DE
URLURL - Source URL, Visit https://www.tandfonline.com/doi/full/10.1080/17480272.2023.2223508 This link opens in a new window

Abstract
The demand for construction timber is continuously increasing, due to its favourable characteristics. However, the adequate protection of wood is key to its successful use, as it is flammable and susceptible to biodegradation. Given that thermal modification enhances the durability of wood, and mineralisation with CaCO$_3$ considerably improves its fire properties, it is worth considering the combined effects of the two methods. European beech (Fagus sylvatica) was selected to determine the effects of a) thermal modification, b) mineralisation through the in-situ formation of CaCO$_3$, and c) a combination of the two procedures, on resistance to decay fungi, reaction to fire and the mechanical properties of the wood. Microscopic analysis and comparisons of the samples before and after exposure to fungi were also conducted. Mineralised wood generally had a slightly alkaline pH value and higher equilibrium moisture content, while thermal modification lowered the equilibrium moisture content. The present study demonstrated the combined effect of thermal modification and mineralisation: the best response to fire as well as resistance to fungi was achieved when the two treatments were combined. Results from the Brinell hardness and three-point bending tests indicate that both modification procedures can slightly impair the mechanical properties of the wood.

Language:English
Keywords:wood, protection, durability, mechanical properties
Work type:Article
Typology:1.01 - Original Scientific Article
Organization:BF - Biotechnical Faculty
Publication status:Published
Publication version:Version of Record
Year:2024
Number of pages:Str. 33–44
Numbering:Vol. 19, no. 1
PID:20.500.12556/RUL-154916 This link opens in a new window
UDC:620.1/.2
ISSN on article:1748-0280
DOI:10.1080/17480272.2023.2223508 This link opens in a new window
COBISS.SI-ID:157967107 This link opens in a new window
Publication date in RUL:08.03.2024
Views:477
Downloads:61
Metadata:XML DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Record is a part of a journal

Title:Wood material science & engineering
Shortened title:Wood mater. sci. eng
Publisher:Taylor & Francis
ISSN:1748-0280
COBISS.SI-ID:522172953 This link opens in a new window

Licences

License:CC BY-NC-ND 4.0, Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
Link:http://creativecommons.org/licenses/by-nc-nd/4.0/
Description:The most restrictive Creative Commons license. This only allows people to download and share the work for no commercial gain and for no other purposes.

Secondary language

Language:Slovenian
Keywords:les, zaščita, trajnost, mehanske lastnosti

Projects

Funder:ARRS - Slovenian Research Agency
Project number:P2-0273
Name:Gradbeni objekti in materiali

Funder:ARRS - Slovenian Research Agency
Project number:P4-0430
Name:Gozdno-lesna veriga in podnebne spremembe: prehod v krožno biogospodarstvo

Funder:ARRS - Slovenian Research Agency
Project number:P4-0015
Name:Les in lignocelulozni kompoziti

Funder:ARRS - Slovenian Research Agency
Funding programme:Young researchers

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back