izpis_h1_title_alt

A new calculation method for instantaneous efficiency and torque fluctuation of spur gears
ID Tian, Xin (Author), ID Wang, Guangjian (Author), ID Jiang, Yujiang (Author)

.pdfPDF - Presentation file, Download (2,36 MB)
MD5: 09096D052B506C04E097BFFD6D7B98E7
URLURL - Source URL, Visit https://www.sv-jme.eu/sl/article/a-new-calculation-method-for-instantaneous-efficiency-and-torque-fluctuation-of-spur-gears/ This link opens in a new window

Abstract
As a critical component of the joint gearbox, spur gear pairs play a crucial role in energy conversion, limiting the performance of a collaborative robot. Accurately assessing their instantaneous efficiency and torque fluctuation is essential for developing high-precision robot joint control models. This study proposes a computational model to predict the instantaneous efficiency and torque fluctuation of spur gears under typical operating conditions. The model incorporates a torque balance model, a load distribution model, and a friction model to reflect the relationship between gear meshing position and efficiency. The instantaneous efficiency and torque fluctuation of gear pairs were compared with the Coulomb friction model with an average friction coefficient and the elastohydrodynamic lubrication model with a time-varying friction coefficient. The effect of gear contact ratio on efficiency is analysed, while the instantaneous efficiency and torque fluctuation of gears are studied under varying operating conditions. The results indicate a maximum efficiency difference of 1.86 % between the two friction coefficient models. Under specific operating conditions, the instantaneous efficiency variation of the gear pair can reach 3.34 %, and the torque fluctuation can reach 5.19 Nm. Finally, this study demonstrates the effectiveness and accuracy of the proposed method through comparative analysis.

Language:English
Keywords:collaborative robots, instantaneous efficiency, torque fluctuation, friction coefficient, load distribution
Work type:Article
Typology:1.01 - Original Scientific Article
Organization:FS - Faculty of Mechanical Engineering
Publication status:Published
Publication version:Version of Record
Year:2024
Number of pages:Str. 55-69
Numbering:Vol. 70, no. 1/2
PID:20.500.12556/RUL-154785 This link opens in a new window
UDC:621.8
ISSN on article:0039-2480
DOI:10.5545/sv-jme.2023.709 This link opens in a new window
COBISS.SI-ID:187333891 This link opens in a new window
Publication date in RUL:01.03.2024
Views:473
Downloads:163
Metadata:XML DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Record is a part of a journal

Title:Strojniški vestnik
Shortened title:Stroj. vestn.
Publisher:Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
ISSN:0039-2480
COBISS.SI-ID:762116 This link opens in a new window

Licences

License:CC BY-NC 4.0, Creative Commons Attribution-NonCommercial 4.0 International
Link:http://creativecommons.org/licenses/by-nc/4.0/
Description:A creative commons license that bans commercial use, but the users don’t have to license their derivative works on the same terms.

Secondary language

Language:Slovenian
Title:Nova metoda za računanje trenutnega izkoristka in nihanj momenta pri čelnih zobniških gonilih
Keywords:kolaborativni roboti, trenutni izkoristek, nihanje momenta, količnik trenja, porazdelitev obremenitev

Projects

Funder:Other - Other funder or multiple funders
Funding programme:National Natural Science Foundation of China
Project number:92048201

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back