Overview of principles and rules of geometrical product specifications according to the current ISO standards

Zupan, Samo (avtor), Kunc, Robert (avtor)

The article provides an overview of the philosophy of geometrical product specifications (GPS), which are, in addition to material specifications, a key component of effective planning and production of mechanical products as well as communication between partners in these processes. The principles and basic rules for precise and unambiguous specification of all requirements are embodied in a series of ISO GPS standards. It includes standards that describe the required accuracy of geometrical features of size and geometrical tolerances. An overview of the fundamental principles and rules imposed by the current ISO GPS standards and their content was carried out. This includes a description of the organization of the ISO GPS system and a summary of the content of the more relevant standards, which have recently undergone multiple revisions. The ISO GPS standards are based on the duality principle of specification and verification. In the present research, we focused primarily on geometrical specifications, while omitting the parallel pillar of verification, which, according to the ISO GPS matrix model, contains an even greater number of standards that define this area in more detail.

• Jezik: Angleški jezik
• Ključne besede: ISO standard, geometrical product specification, geometrical dimensioning, tolerancing, principles, rules, size, tolerance, verification
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: Str. 3-19
• Številčenje: Vol. 70, no. 1/2
• PID: 20.500.12556/RUL-154750
• UDK: 006:744
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2023.753
• COBISS.SI-ID: 187090947
• Datum objave v RUL: 28.02.2024

ZUPAN, Samo in KUNC, Robert, 2024, Overview of principles and rules of geometrical product specifications according to the current ISO standards. Strojniški vestnik [na spletu]. 2024. Vol. 70, no. 1/2, p. 3–19. [Dostopano 15 april 2025]. DOI 10.5545/sv-jme.2023.753. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=154750

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Pregled načel in pravil za geometrijske specifikacije izdelkov v skladu z aktualnimi ISO standardi
• Ključne besede: ISO standard, geometrijske specifikacije proizvodov, GPS, geometrijske tolerance, načela, pravila, velikost, toleranca, verifikacija