A hybrid radial basis function-finite difference method for modelling two-dimensional thermo-elasto-plasticity : Application to cooling of hot-rolled steel bars on a cooling bed

Vuga, Gašper (avtor), Mavrič, Boštjan (avtor), Hanoglu, Umut (avtor), Šarler, Božidar (avtor)

This paper represents Part 2 of the parallel paper Part 1, where the strong form hybrid RBF-FD method was developed for solving thermo-elasto-plastic problems. It addresses the industrial application of this novel meshless method to steel bars cooling on a cooling bed (CB) where the formation of residual stress is of primary interest. The study investigates the impact of the distance between the bars and the distance to the heat shield above the CB on radiative heat fluxes and, consequently, on thermo-mechanical response. The thermal model is solved on bars cross-section with a RBF-FD method where augmented polyharmonic splines are used for the local approximation. View factors, computed with a Monte-Carlo method, are included in radiative heat fluxes. The thermal solution is incrementally applied on a mechanical model that assumes a generalised plane strain state and captures bars bending. The study employs a hybrid RBF-FD method to resolve a nonlinear discontinuous mechanical problem successfully. The simulation of the process shows how different process parameters influence the thermo-mechanical response of the bars.

• Jezik: Angleški jezik
• Ključne besede: steel bars, cooling bed, thermo-mechanical modelling, hybrid radial basis function, generated finite differences, residual stresses
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2024
• Št. strani: Str. 331-341
• Številčenje: Vol. 159
• PID: 20.500.12556/RUL-153392
• UDK: 539.4
• ISSN pri članku: 0955-7997
• DOI: 10.1016/j.enganabound.2023.12.001
• COBISS.SI-ID: 179241219
• Datum objave v RUL: 03.01.2024

Gradivo je del revije

• Naslov: Engineering analysis with boundary elements
• Skrajšan naslov: Eng. anal. bound. elem.
• Založnik: Elsevier
• ISSN: 0955-7997
• COBISS.SI-ID: 5605380

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: jeklene palice, hladilne klopi, termo-mehansko modeliranje, hibridne končne diference, radialne bazne funkcije, zaostale napetosti