izpis_h1_title_alt

A coupled simulation of parametric porous microstructure and stress-strain behavior in mechanical components under variable cyclic loads
ID Šeruga, Domen (Avtor), ID Klemenc, Jernej (Avtor), ID Oman, Simon (Avtor), ID Nagode, Marko (Avtor)

.pdfPDF - Predstavitvena datoteka. Vsebina dokumenta nedostopna do 17.10.2025.
MD5: E4435DBD641EDAE696329F17483FE84A
URLURL - Izvorni URL, za dostop obiščite http://www.techno-press.org/content/?page=article&journal=csm&volume=12&num=5&ordernum=2 Povezava se odpre v novem oknu

Izvleček
A coupled algorithm is proposed which first considers the creation of porous structure of the material and then the simulations of response of mechanical components with porous structure to a variable load history. The simulations are carried out by the Prandtl operator approach in the finite element method (FEM) which enables structural simulations of mechanical components subjected to variable thermomechanical loads. Temperaturedependent material properties and multilinear kinematic hardening of the material can be taken into account by this approach. Several simulations are then performed for a tensile-compressive specimen made of a generic porous structure and mechanical properties of Aluminium alloy AlSi9Cu3. Variable mechanical load history has been applied to the specimens under constant temperature conditions. Comparison of the simulation results shows a considerable elastoplastic stress-strain response in the vicinity of pores whilst the surface of the gauge-length of the specimen remains in the elastic region of the material. Moreover, the distribution of the pore sizes seems more influential to the stress-strain field during the loading than their radial position in the gauge-length.

Jezik:Angleški jezik
Ključne besede:cyclic loading, elastoplasticity, finite element analysis, porous structure
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Recenzirani rokopis
Datum objave:17.10.2023
Leto izida:2023
Št. strani:10 str.
Številčenje:Vol. 12, no. 5
PID:20.500.12556/RUL-152014 Povezava se odpre v novem oknu
UDK:539.3
ISSN pri članku:Y509-2337
DOI:10.12989/csm.2023.12.5.409 Povezava se odpre v novem oknu
COBISS.SI-ID:170212355 Povezava se odpre v novem oknu
Datum objave v RUL:27.10.2023
Število ogledov:348
Število prenosov:23
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Coupled systems mechanics. ǂan ǂinternational journal
Založnik:Techno press
COBISS.SI-ID:6932577 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:ciklična obremenitev, elastoplastičnost, analiza končnih elementov, porozna struktura

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0182
Naslov:Razvojna vrednotenja

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj