Differences between 3-D printed and traditionally milled CoCr dental alloy from casted block in oral environment

Bajt Leban, Mirjam (avtor), Kurnik, Matej (avtor), Kopač, Igor (avtor), Klug Jovičević, Matic (avtor), Podgornik, Bojan (avtor), Kosec, Tadeja (avtor)

The aim of this study was to compare corrosion resistance and ion release in CoCr dental alloys with identical chemical compositions produced using different technologies (SLM – selective laser melting and milling from cast blocks) and heat treatment (SLM parts only). The corrosion properties were tested in artificial saliva, artificial saliva with fluoride ions, and artificial saliva with added lactic acid to simulate inflammations. The study included electrochemical tests, microstructural investigation and ion release tests in the three different environments for a total of 42 days. The best performance of CoCr as a result of potentiodynamic polarization was observed in the artificial saliva with added lactic acid, which is in contradiction with the highest ion release measured from all the materials tested and electrochemical impedance spectroscopy that showed a deterioration of the passive layer in an acidic environment. Microstructural investigation revealed that different phases precipitated by heat treatment trigger increased release of Mo and W ions. The printing method does not raise critically ion release from CoCr alloy, while the state of the surface greatly impacts the extent of the ion release. This study demonstrates the importance of an interdisciplinary approach to the study of corrosion and biocompatibility in dental alloys.

• Jezik: Angleški jezik
• Ključne besede: CoCr dental alloy, selective laser melting, corrosion, ion release, artificial saliva
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: MF - Medicinska fakulteta
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2023
• Št. strani: 11 str.
• Številčenje: Vol. 445, art. 142066
• PID: 20.500.12556/RUL-148303-d0097cf5-b479-d7ea-5d4a-9d72c0ba3279
• UDK: 616.31
• ISSN pri članku: 1873-3859
• DOI: 10.1016/j.electacta.2023.142066
• COBISS.SI-ID: 142379779
• Datum objave v RUL: 11.08.2023

Gradivo je del revije

• Naslov: Electrochimica acta
• Založnik: Elsevier, International Society of Electrochemistry
• ISSN: 1873-3859
• COBISS.SI-ID: 135479555

Licence

• Licenca: CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
• Opis: Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: CoCr dentalna zlitina, selektivno lasersko raztaljevanje, korozija, sproščanje ionov, umetna slina

Projekti

• Financer: ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
• Številka projekta: L2-1831
• Naslov: Implementacija aditivnih tehnologij v stomatološki protetiki