Ocena tveganja delovnega mesta v laboratoriju

Owowa, David (author), Jerman, Boris (mentor), Majdič, Franc (comentor)

V teoretičnem delu magistrske naloge so predstavljeni tehnična zakonodaja, harmonizirani standardi, koncepta direktiv novega in starega pristopa ter direktiva o strojih. Sledi opis vrst nevarnosti, ki so lahko prisotne na strojih. Predstavljen je standard ISO 12100, ki opisuje korake za izvedbo ocene tveganja. Predstavljena sta postopka za oceno tveganja po metodah AUVA in Reudenbach. Izbrana je primernejša od metod, s katero je nato tudi ocenjeno tveganje za obravnavano preizkuševališče oz. delovno mesto. V nadaljevanju so predstavljena tudi navodila za uporabo preizkuševališča, ki so bila izdelana v okviru naloge. Ocena tveganja je pokazala, da je kar 11 nevarnosti od skupno 16 na preizkuševališču prisotnih nevarnosti imelo previsoko tveganje. S pomočjo ukrepov zmanjševanja tveganja smo tveganja zmanjšali na dopustno raven.

• Language: Slovenian
• Keywords: nevarnosti in tveganja na delovnem mestu nevarnosti in tveganja pri strojih ocena tveganja metode ocenjevanja tveganja zmanjševanje tveganja navodila za uporabo
• Work type: Master's thesis/paper
• Typology: 2.09 - Master's Thesis
• Organization: FS - Faculty of Mechanical Engineering
• Place of publishing: Ljubljana
• Publisher: [D. Owowa]
• Year: 2023
• Number of pages: XX, 60 str.
• PID: 20.500.12556/RUL-147178
• UDC: 614.8:331.458(043.2)
• COBISS.SI-ID: 156987651
• Publication date in RUL: 24.06.2023

Secondary language

• Language: English
• Title: Risk assessment of the laboratory workplace

Abstract

The theoretical part of the master's thesis presents technical legislation, harmonized standards, concepts of the new and old approach directives and the machinery directive. This is followed by a description of the types of hazards that may be present at the machinery. The ISO 12100 standard is presented, which describes the steps for performing a risk assessment. The risk assessments procedures according to the AUVA and Reudenbach are presented. A more suitable method is used to assess the risks of the testing site of interest. In the following, the instructions for use are presented, which were prepared as part of this thesis. The risk assessment showed that 11 out of 16 hazards present at the test site had an excessively high risk-level. With the help of risk reduction measures, the risks were reduced to an acceptable level.

• Keywords: hazards and risks in the workplace machine hazards and risks risk assessment risk assessment methods risk mitigation instructions for use