Thermal investigations on a CNC lathe fitted with a dynamically enhanced steel-reinforced epoxy granite bed

Ramana, Mula Venkata (avtor), Pudukarai Ramaswamy, Thyla (avtor), Subramanian, Elango (avtor), Chinnuraj, Shanmugam (avtor)

Polymer concrete or epoxy granite is becoming more popular for beds, bases, and other structures of precision machine tools, owing to its excellent damping characteristics. To realize the same static rigidity as that of the cast-iron structures, steel-reinforced epoxy granite (SREG) structures are being used. The vast differences in the thermal properties of steel and epoxy granite (EG) are likely to cause higher magnitudes of thermal error. This work aims to investigate the thermal behaviour of a computerized numerical control (CNC) lathe built with a novel dynamically enhanced SREG bed and compare its performance with the lathe with a cast iron bed. Experimental and numerical investigations have been carried out under cross-feed (CF) drive idle running conditions to determine the TCP deformation. The results reveal that the thermal error in the CNC lathe with SREG bed is 1.68 times that of the lathe with cast iron (CI) bed at 20 ºC and 1.8 times at 40 ºC environmental temperature variation chamber (ETVC) conditions. It could be identified that the heat generated in the CF is conducted to the steel guideways embedded in the SREG bed, but further heat transfer to the EG portion of the bed is impeded, and hence the heat accumulation that occurs in the guideways leads to higher magnitude of the thermal error. The experimentally validated numerical model is used to extend the investigations to study the effect of the idle running of the longitudinal feed drive (LF) and combined cross and longitudinal feed drives, on the thermal behaviour of the lathe.

• Jezik: Angleški jezik
• Ključne besede: precision machine tools, thermal error, steel reinforcement, epoxy granite
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2023
• Št. strani: Str. 169-184
• Številčenje: Vol. 69, no. 3/4
• PID: 20.500.12556/RUL-145175
• UDK: 621.9
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2022.356
• COBISS.SI-ID: 148509187
• Datum objave v RUL: 12.04.2023

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Licence

• Licenca: CC BY-NC 4.0, Creative Commons Priznanje avtorstva-Nekomercialno 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by-nc/4.0/deed.sl
• Opis: Licenca Creative Commons, ki prepoveduje komercialno uporabo, vendar uporabniki ne rabijo upravljati materialnih avtorskih pravic na izpeljanih delih z enako licenco.

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Raziskava toplotnih lastnosti CNC-stružnice z dinamično izboljšano posteljo iz epoksi granita, ojačenega z jeklom
• Ključne besede: precizni obdelovalni stroji, termična napaka, jeklena ojačitev, epoksi granit, temperaturni raztezki, polimerni beton, postelja stružnice, dušenje

Projekti

• Financer: Drugi - Drug financer ali več financerjev
• Program financ.: Office of the Principal Scientific Adviser to the Government of India
• Številka projekta: SA/DRDP/MT/2010(G)