izpis_h1_title_alt

Vpliv materiala bata sedežnega ventila na odzivnost ventila v vodni hidravliki
ID Dolinar, Anže (Author), ID Majdič, Franc (Mentor) More about this mentor... This link opens in a new window

.pdfPDF - Presentation file, Download (7,42 MB)
MD5: FA609183C4963DF9C2DCC1F0F0439A09

Abstract
Industrija hidravličnih komponent za uporabo v oljni hidravliki je tekom časa zgradila monopol nad razvojem. Razvijale so se le komponente za uporabo v oljni hidravliki. Voda ima v primerjavi z oljem kot hidravlično kapljevino boljši ekološki vpliv, saj ne onesnažuje okolja. Prav ekologija je pognala ponovni razvoj vodne hidravlike, ki se je uporabljala že v samih začetkih razvoja hidravlike. Razvoj vodne hidravlike napreduje, pa se lahko kosa z oljno hidravliko? Prav to se sprašujemo v tej diplomski nalogi. Potni ventil, ki je v osnovi namenjen uporabi v oljni hidravliki, smo preizkušali v vodni hidravliki. Raziskali smo odzivnost vodne hidravlike s krmilnimi bati različnih materialov. Ti materiali so bili jeklo, aluminij in dva različna polimera. To smo ponovili še za oljno hidravliko ter odzive med seboj primerjali. Za potni ventil EVC-34 smo zasnovali oljno in vodno preizkuševališče. Odzivnost krmilnih batov smo merili s hitro kamero in tlačnimi senzorji, meritve pa smo ponovili pri različnih tlakih.

Language:Slovenian
Keywords:vodna hidravlika, oljna hidravlika, sedežni ventil, krmilni bat, hitra kamera, tlačni senzor
Work type:Bachelor thesis/paper
Typology:2.11 - Undergraduate Thesis
Organization:FS - Faculty of Mechanical Engineering
Place of publishing:Ljubljana
Publisher:[A. Dolinar]
Year:2023
Number of pages:XXII, 45 str.
PID:20.500.12556/RUL-144211 This link opens in a new window
UDC:621.646.2:621.22.011(043.2)
COBISS.SI-ID:141062147 This link opens in a new window
Publication date in RUL:04.02.2023
Views:1102
Downloads:99
Metadata:XML DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Secondary language

Language:English
Title:Effect of spool material of seating valve on performance in water hydraulic
Abstract:
Over time, the hydraulic component industry for oil hydraulics has gained a monopoly in development. Only components for oil hydraulics have been developed. Compared with oil, water as a hydraulic fluid has a better ecological effect, because it does not pollute the environment. Ecology has restarted the development of water hydraulics, which was used in the early days of hydraulics. The development of water hydraulics is progressing, but can it compete with oil hydraulics? That is the main question in this dissertation. We used a directional control valve, originally developed for oil hydraulics, in water hydraulics. We studied the performance of control spools made of different materials. These materials were steel, aluminium and two different polymers. We repeated the tests with oil hydraulics and compared the results. We designed an oil and water test station or seating valve EVC-34. The response of the control spool was measured with a high-speed camera and a pressure sensor. The measurements were repeated at different pressures.

Keywords:water hydraulics, oil hydraulics, seating valve, control spool, high-speed camera, pressure sensor

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back