Agile development of polymer power transmission systems for e-mobility : a novel methodology based on an e-bike drive case study

Demšar, Ivan (avtor), Černe, Borut (avtor), Tavčar, Jože (avtor), Vukašinović, Nikola (avtor), Zorko, Damijan (avtor)

The market for electric bicycles has grown extremely and developed rapidly in recent years. To enter such a market with a new product, the development process has to be fast, and throughout the process, feedback from future potential customer(s) should be sought in order to achieve the best possible market acceptance. The article presents the design process of a pedelec e-bike central drive system. The authors were members of the development team and the designers of the mechanical transmission, and therefore had a good overview of the whole project. The development process and the set-up of production require a certain amount of time, during which design changes are inevitable due to changes in customer expectations and demands. The development team should respond to these changes and take them into account during development. Only the ability to react to changes and constant communication with the customer will ultimately lead to a product that can be commercially successful. Based on a critical review of the successfully completed project, general guidelines were established for the development of mechatronic products that consider the principles of Agile methodology. Particular attention was paid to the development of polymer gears, as these were the most demanding components in the system. The presented guidelines were based on an overview of the e-bike R&D process presented, but they can be generalized and used in the development process of any technical physical product. Agile methods were developed in the field of software development and therefore cannot be directly transferred to the field of physical product development. The article highlights and discusses individual special features that distinguish agile development of physical products from software development.

• Jezik: Angleški jezik
• Ključne besede: agile development, design, e-bikes drive, transmissions, polymer gears
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2023
• Št. strani: 24 str.
• Številčenje: Vol. 15, iss. 1
• PID: 20.500.12556/RUL-143567
• UDK: 621.83.052
• ISSN pri članku: 2073-4360
• DOI: 10.3390/polym15010068
• COBISS.SI-ID: 135469315
• Datum objave v RUL: 28.12.2022

Gradivo je del revije

• Naslov: Polymers
• Skrajšan naslov: Polymers
• Založnik: MDPI
• ISSN: 2073-4360
• COBISS.SI-ID: 517951257

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: agilen razvoj, oblikovanje, pogon e-koles, prenosi, polimerni zobniki