Nitriding HS6-5-2 steel in inductively coupled plasma

Binienda, Marek (avtor), Pietrasik, Robert (avtor), Pawęta, Sylwester (avtor), Matczak, Krzysztof (avtor), Krotewicz, Witold (avtor)

This article presents research on the possibility of obtaining a hardened surface layer via nitriding in coupled plasma (ICP) for HS6-5-2 steel. The subject of the investigation was the influence of the process parameters on the properties of the obtained layers. The surface layers were characterized using an optical microscope, SEM (Scanning Electron Microscope), EDS (Energy Dispersive Spectroscopy), XRD (X-Ray Diffraction), and a microhardness tester. The generator power was changed gradually from 500 W to 2 kW and the tests were carried out for various process durations, from 15 to 45 minutes at a set pressure. The obtained results show the possibility of obtaining nitrided surface layers with a thickness of up to 0.1 mm and a significant increase in hardness in a very short time.

• Jezik: Angleški jezik
• Ključne besede: plasma, nitriding, surface layer, hardness
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Datum objave: 01.07.2022
• Leto izida: 2022
• Št. strani: Str. 506-513
• Številčenje: Vol. 68, no. 7/8
• PID: 20.500.12556/RUL-140857
• UDK: 533
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2022.30
• COBISS.SI-ID: 122106627
• Datum objave v RUL: 20.09.2022

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Nitridiranje jekla HS6-5-2 v induktivno sklopljeni plazmi
• Ključne besede: plazma, nitridiranje, površinski sloj, trdota

Projekti

• Financer: Drugi - Drug financer ali več financerjev
• Program financ.: Sectoral Research & Development programs
• Naslov: Program Operacyjny Inteligentny Rozwój 2014–2020 (Smart Growth Operational Program 2014–2020)

• Financer: EC - European Commission
• Program financ.: European Regional Development Fund
• Številka projekta: POIR.01.01.01-00-0088/17
• Naslov: Development of nitriding technology for machine parts and tools in inductively coupled plasma together with a device for its implementation