Snovanje naprave za visokotlačno odstranjevanje kovinskih oksidov s površine vroče valjanega jekla

Heath, George Reuben (author), Zupančič, Matevž (mentor), Golobič, Iztok (comentor)

V nalogi je obravnavana problematika vzdrževanja in krmiljenja naprave za visokotlačno odstranjevanje oksidov s površine vroče valjanega jekla. Naloga je sestavljena iz opazovanja sledi vodnih curkov, ocene čistilnega učinka trenutne naprave z uporabo IR in hitrotekoče kamere ter predloga za njeno izboljšavo. Rezultati meritev so pokazali, da trenutne nastavitve sprejemljivo odstranjujejo okside, vendar naprava ne deluje zanesljivo. IR termografija se je izkazala za ustrezen način sprotnega spremljanja kvalitete odbrizga. Za rešitev težav smo zasnovali 3D model naprave s posodobljenim ohišjem, dvižnim mehanizmom in zaščito pred obrabo, za katero predvidevamo, da bo odpravila obstoječe probleme.

• Language: Slovenian
• Keywords: odstranjevanje oksidov, kovinski oksidi, infrardeča termografija, 3D modeliranje
• Work type: Final paper
• Typology: 2.11 - Undergraduate Thesis
• Organization: FS - Faculty of Mechanical Engineering
• Place of publishing: Ljubljana
• Publisher: [G. Reuben Heath]
• Year: 2022
• Number of pages: XV, 40 f.
• PID: 20.500.12556/RUL-140058
• UDC: 536.24+004.925.84:621.79(043.2)
• COBISS.SI-ID: 133443075
• Publication date in RUL: 10.09.2022

Secondary language

• Language: English
• Title: Design of device for the high pressure removal of metal oxides on the surface of hot rolled steel

Abstract

The work deals with the issue of maintenance and control of a device for high-pressure removal of oxides from the surface of hot-rolled steel. The study consists of observing the traces of water jets, evaluating the cleaning effect of the current device using an IR and high-speed camera, and a proposed solution for its improvement. The results of the measurements showed that the current settings remove the oxides acceptably, but the device does not operate reliably. IR thermography has proven to be a suitable method for real-time monitoring of the quality of the scale removal. To address these issues, we designed a 3D model of the device with an updated housing, lifting mechanism, and wear protection that we believe will eliminate the existing problems.

• Keywords: removal of oxides, metal oxides, infrared thermography, 3D modeling