Projektiranje in programiranje naprave za vrtanje in zlaganje ohišij EIKA

VIDLAK, JAN (avtor), Logar, Vito (mentor)

V diplomskem delu je predstavljen razvoj in delovanje naprave za vrtanje in zlaganje termostatskih ohišij EIKA. Naprava je namenjena podjetju ETI Proplast d. o. o., ki se ukvarja z rešitvami na področjih avtomatizacije naprav in strojev ter konstruiranja orodij. V prvem delu diplomskega dela je predstavljen opis naprave, od pomikalnih in vrtalnih enot do zlagalne enote. Napravo krmilimo s Siemensovim programirljivim logičnim krmilnikom (PLK) Simatic S7-1200. Poleg krmilnika naprava vsebuje še Siemensov HMI, s katerim spreminjamo želene parametre in spremljamo dejansko stanje na napravi. Poleg PLK-ja in HMI-ja so v nalogi predstavljeni še frekvenčni pretvorniki, varnostni modul, servo-motorski pogoni Festo, linearna enota Fastech, ventilski otok SMC in vhodno/izhodni moduli Beckhoff. Drugi del naloge je posvečen programiranju naprave. Poleg komponent za delovanje naprave je predstavljeno programsko okolje TIA-Portal V15, ki je uporabljeno za programiranje PLK-ja. Predstavljen pa je tudi programski del, od samega PLK-ja do HMI-ja. Rezultat diplomskega dela je projektiranje naprave in uporabljenih komponent ter izdelava delujočega programa.

• Jezik: Slovenski jezik
• Ključne besede: termostatsko ohišje EIKA, programirljiv logični krmilnik, vmesnik človek stroj, TIA Portal, avtomatizacija
• Vrsta gradiva: Diplomsko delo/naloga
• Organizacija: FE - Fakulteta za elektrotehniko
• Leto izida: 2022
• PID: 20.500.12556/RUL-140023
• COBISS.SI-ID: 121043203
• Datum objave v RUL: 09.09.2022

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Design and programming of the device for drilling and stacking the EIKA housings

Izvleček

The thesis presents the development and operation of the device for drilling and stacking EIKA thermostat housings. The device is developed for the company ETI Proplast d. o. o., which deals with solutions for the automation of plants, machines and tool construction. The first part of the thesis presents a description of the device, from scrolling and drilling units to stacking units. The device is controlled by Siemens Simatic S7-1200 programmable logic controller (PLC). In addition to the controller, the device includes a Siemens HMI, which allows modifications of the device parameters and monitoring of its actual status. In addition to the PLC and HMI, frequency converters, a safety module, Festo servo-motor drives, a Fastech linear unit, a SMC valve island and Beckhoff input/output modules are also presented. The second part of the thesis is dedicated to programming of the device. In addition to the components for the operation of the device, the TIA-Portal V15 programming environment, used for programming the PLC, is presented. The software part from the controller itself to the HMI is also presented. The results of the thesis are the design of the device and the components used, as well as the creation of a working program.

• Ključne besede: EIKA thermostatic housing, programmable logic controller, Human-Machine Interface, TIA Portal, automation