Effect of Immersion media for polyester composite reinforced with chicken feathers on creep behavior

Abed, Balsam H. (avtor), Battawi, Ali A. (avtor), Khuder, Abdul Wahab H. (avtor)

The use of composite materials has expanded in industrial applications around the world, reinforcing composites with waste materials like (chicken feather) is one of the effective ways to solve environmental concerns compared to traditional methods, as it is considered one of the renewable and inexpensive methods in addition to its presence in abundance. The main added features of composite materials over classic materials are the light-weight. This paper investigates the effect of immersion media for a polyester composite reinforced with chicken feather fillers to enhance the creep characteristic. The composite was manufactured using a hand-layup process. The samples were produced by varying the weight ratios of fiber loading (0 %, 0.2 %, 0.4 %, 0.6 % and 0.8 %) and immersed in three different media (KCl (salt media), NaOH (alkali media) and HNO3 (acid media)). The creep samples were tested according to ASTM standards. The results show that chicken feather–reinforced composites immersed in various media have probable applications because of their superior mechanical properties over non-reinforced composites.

• Jezik: Angleški jezik
• Ključne besede: immersed, chicken feather, polyester composites, creep behavior, reinforcement
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Datum objave: 20.04.2022
• Leto izida: 2022
• Št. strani: 8 str.
• Številčenje: Vol. 68, no. 6
• PID: 20.500.12556/RUL-138107
• UDK: 621:620.1
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2021.7471
• COBISS.SI-ID: 114794499
• Datum objave v RUL: 11.07.2022

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
• Začetek licenciranja: 20.04.2022

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Vpliv namakalnega medija na lezenje poliestrskega kompozita, ojačenega s piščančjim perjem
• Ključne besede: namakanje, piščančje perje, poliestrski kompoziti, lezenje, ojačitve