Optimization of FSW processing factors on hardness for dissimilar AA6061-T6 and AZ31B O alloys

Vasantha Kumar, Karutha Pandian (avtor), Balasubramanian, Muthusamy (avtor)

In modern industries, such as aerospace, automotive, marine and others, aluminium and magnesium alloys are the most frequently used non-ferrous materials. This paper discusses optimising processing factors to produce a high hardness of dissimilar Al/Mg alloys. The experiment was designed and conducted by varying input factors according to response surface methodology-central composite design. The regression model has been developed between the processing factor and hardness based on the results of the experiment. ANOVA is used to validate the regression model and to assess the percentage of each hardness factor’s contribution. Finally, the desirability approach is used to optimise the processing factor for high hardness.

• Jezik: Angleški jezik
• Ključne besede: dissimilar friction stir welding, aluminium alloy AA6061, magnesium alloys AZ31B, ANOVA
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Datum objave: 01.03.2022
• Leto izida: 2022
• Št. strani: Str. 166-174
• Številčenje: Vol. 68, no. 3
• PID: 20.500.12556/RUL-136402
• UDK: 621.791
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2021.7316
• COBISS.SI-ID: 105657859
• Datum objave v RUL: 29.04.2022

VASANTHA KUMAR, Karutha Pandian in BALASUBRAMANIAN, Muthusamy, 2022, Optimization of FSW processing factors on hardness for dissimilar AA6061-T6 and AZ31B O alloys. Strojniški vestnik [na spletu]. 2022. Vol. 68, no. 3, p. 166–174. [Dostopano 4 april 2025]. DOI 10.5545/sv-jme.2021.7316. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=136402

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
• Začetek licenciranja: 02.02.2022
• Vezano na: Accepted for publication

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Optimizacija faktorjev varjenja raznorodnih zlitin AA6061-t6 and AZ31B za trdoto spojev
• Ključne besede: varjenje raznorodnih materialov z gnetenjem, aluminijeva zlitina AA6061, magnezijeva zlitina AZ31B, varjenje z gnetenjem, analiza variance