izpis_h1_title_alt

Evaluating common-mode voltage based trade-offs in differential-ended and single-supplied signal conditioning amplifiers
ID Petkovšek, Marko (Avtor), ID Zajec, Peter (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (5,10 MB)
MD5: AC2B53FE9EAC083044964D851EF859F5
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/2079-9292/10/16/1982 Povezava se odpre v novem oknu

Izvleček
This paper focuses on a differential voltage measurement in low-voltage automotive devices whose subunits are separated with a low-side safety switch. In contrast to conventional applications with high-side switches, a common-mode voltage (CMV) with negative polarity exists at the input of the signal conditioning circuitry. To overcome the shortage of dedicated integrated circuits capable of withstanding negative CMV, the paper investigates single- and two-stage differential circuits with single-supplied operational amplifiers to find a cost-optimized counterpart. In addition, the proposed procedure tunes the circuit parameters in such a manner to obtain the largest possible full-scale range at the output. Though, such optimization results in very uncommon values for gain and reference voltages. This issue is additionally evaluated for reference voltages that are either cost-effective or more easily accessible to increase the circuit feasibility. Since the impact of resistances on circuits’ behaviour could be diminished to a great extent using high-precision and matched pair resistors, the sensitivity analysis was investigated only for a reference voltage change. Furthermore, a reversed termination of measured voltages results in a simplified reference voltage selection without hindering circuits’ performance, proven by simulation and experimental results.

Jezik:Angleški jezik
Ključne besede:voltage measurements, common-mode voltage, operational amplifiers, differential-ended signal conditioning, high-power devices, low-side switch
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FE - Fakulteta za elektrotehniko
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2021
Št. strani:18 str.
Številčenje:Vol. 10, iss. 16, art. 1982
PID:20.500.12556/RUL-136094 Povezava se odpre v novem oknu
UDK:621.31
ISSN pri članku:2079-9292
DOI:10.3390/electronics10161982 Povezava se odpre v novem oknu
COBISS.SI-ID:74170883 Povezava se odpre v novem oknu
Datum objave v RUL:12.04.2022
Število ogledov:869
Število prenosov:111
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Electronics
Skrajšan naslov:Electronics
Založnik:MDPI
ISSN:2079-9292
COBISS.SI-ID:523068953 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
Začetek licenciranja:17.08.2021

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:merjenje napetosti, sofazna napetost, operacijski ojačevalniki, diferenčna prilagoditev signala, močnostni pretvorniki

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:L2-2619
Naslov:Napredni elektronski napajalni modul za avtomobilski katalizator

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj