izpis_h1_title_alt

Estimate of Coffin–Manson curve shift for the porous alloy AlSi9Cu3 based on numerical simulations of a porous material carried out by using the Taguchi array
ID Tomažinčič, Dejan (Avtor), ID Klemenc, Jernej (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (10,17 MB)
MD5: BF27F26A682060BD0ED28A15260CB6C2
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/1996-1944/15/6/2269 Povezava se odpre v novem oknu

Izvleček
In real engineering applications, machine parts are rarely completely homogeneous; in most cases, there are at least some minor notch effects or even more extensive inhomogeneities, which cause critical local stress concentrations from which fatigue fractures develop. In the present research, a shift of the Coffin–Manson ε$_a$–N material curve in a structure with random porosity subjected to dynamic LCF loads was studied. This allows the rest of the fatigue life prediction process to remain the same as if it were a homogeneous material. Apart from the cyclic σ–ε curve, which is relatively easy to obtain experimentally, the ε$_a$–N curve is the second most important curve to describe the correlation between the fatigue life N and the strain level ε$_a$. Therefore, the correct shift of the ε$_a$–N curve of the homogeneous material to a position corresponding to the porous state of the material is crucial. We have found that the curve shift can be efficiently performed on the basis of numerical simulations of a combination of five porosity-specific geometric influences and the associated regression analysis. To model the modified synthetic ε$_a$–N curve, five geometric influences of porosity by X-ray or µ-CT analysis are quantified, and then the porosity-adjusted coefficients of the Coffin–Manson equation are calculated. The proposed approach has been successfully applied to standard specimens with different porosity topography.

Jezik:Angleški jezik
Ključne besede:low-cycle fatigue, aluminium alloys, porosity, Coffin–Manson relationship, Taguchi, multivariate regression analysis
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2022
Št. strani:24 str.
Številčenje:Vol. 15, iss. 6, art. 2269
PID:20.500.12556/RUL-135574 Povezava se odpre v novem oknu
UDK:620.178.3:669.715
ISSN pri članku:1996-1944
DOI:10.3390/ma15062269 Povezava se odpre v novem oknu
COBISS.SI-ID:101646083 Povezava se odpre v novem oknu
Datum objave v RUL:21.03.2022
Število ogledov:548
Število prenosov:125
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Materials
Skrajšan naslov:Materials
Založnik:MDPI
ISSN:1996-1944
COBISS.SI-ID:33588485 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
Začetek licenciranja:18.03.2022

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:malociklično utrujanje, aluminijeve zlitine, poroznost, soodvisnost Coffin-Manson, Taguchi, multivariatna regresijska analiza

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0182
Naslov:Razvojna vrednotenja

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj