Change of the properties of steel material of the roller cone bit due to the influence of the drilling operational parameters and rock properties

Šporin, Jurij (author), Balaško, Tilen (author), Mrvar, Primož (author), Janc, Blaž (author), Vukelič, Željko (author)

The breakdown of the drill bit or rapid decrease of the rate of penetration during the drilling process results in a delay in the progress of drilling. Scientists and engineers are increasingly focusing on research to extend the bit life and improve the drilling rate. In our work, “in situ” drilling parameters were monitored during the drilling process with the roller cone drill bit IADC 136, diameter 155.57 mm (6 1/8"). After drilling, the bit was thoroughly examined to determine the damage and wear that occurred during drilling. The following modern and standardized investigative methods were used: an analysis of rock materials and an analysis of micro and macrostructure materials of the roller cone bit. Analyses were carried out using optical and electron microscopy, a simultaneous thermal analysis of materials of drill bit, analysis of the chemical composition of materials of drill bit, and a determination of the geomechanical parameters of rock materials. The resulting wear, local bursts, and cracks were quantitatively and qualitatively defined and linked to the drilling regime and the rock material. The results of our investigation of the material of the roller cone bit can serve as a good base for the development of new steel alloys, which can resist higher temperatures and enable effective drilling, without structural changes of steel material.

• Language: English
• Keywords: drilling, roller cone bit, mechanism of drill bit wear, carbide coating, HV hardness, high temperature
• Work type: Article
• Typology: 1.01 - Original Scientific Article
• Organization: NTF - Faculty of Natural Sciences and Engineering
• Publication status: Published
• Publication version: Version of Record
• Year: 2020
• Number of pages: 22 str.
• Numbering: Vol. 13, iss. 22, art. 5949
• PID: 20.500.12556/RUL-134701
• UDC: 622
• ISSN on article: 1996-1073
• DOI: 10.3390/en13225949
• COBISS.SI-ID: 37610499
• Publication date in RUL: 27.01.2022

Record is a part of a journal

• Title: Energies
• Shortened title: Energies
• Publisher: Molecular Diversity Preservation International
• ISSN: 1996-1073
• COBISS.SI-ID: 518046745

Licences

• License: CC BY 4.0, Creative Commons Attribution 4.0 International
• Link: http://creativecommons.org/licenses/by/4.0/
• Description: This is the standard Creative Commons license that gives others maximum freedom to do what they want with the work as long as they credit the author.
• Licensing start date: 14.11.2020