izpis_h1_title_alt

Design of pH responsive textile as a sensor material for acid rain
ID Stojkoski, Viktor (Avtor), ID Kert, Mateja (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (2,09 MB)
MD5: F73F7FCEDAA24E3A5AF96CD6D519CECA
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/2073-4360/12/10/2251 Povezava se odpre v novem oknu

Izvleček
The chemical composition of rainwater can serve as an indicator of the excess of acidifying air pollutants. The pH value of rainwater in the presence of sulphur dioxide and nitrogen oxides, the precursors of acid rain, falls below pH 5.6, which is the limit value for acid rain. In this research, the tailoring of halochromic textile was examined for the design of a functional textile that can serve as a sensor and inform the wearer about the presence of pollutants in the air by means of an immediate colour change. For this purpose, a polyamide 6 fabric was dyed with the pH-sensitive Bromocresol green dye, which causes a colour change below pH 3.6 (yellow) and above pH 5.4 (blue). In addition, the dyed polyamide 6 fabric was treated with a water and oil repellent finish. Colour and colour change before and after immersion of unfinished and finished dyed samples in buffer solutions with different pH values were evaluated spectrophotometrically using the CIELAB colour space. The colour fastness to rubbing, washing, and light, and the water and oil repellency of the dyed fabrics were determined according to valid SIST EN ISO standards. The results showed that the unfinished dyed polyamide 6 fabric undergoes a reversible colour change faster and more clearly than the finished dyed polyamide 6 fabric. The dyed polyamide 6 fabric had good colour fastness to rubbing and domestic and commercial laundering, while the colour fastness to light was poor. In addition, the dyed polyamide 6 fabric was pH-sensitive, despite dye degradation under xenon light, regardless of whether it was finished.

Jezik:Angleški jezik
Ključne besede:pH sensitive dyes, bromocresol green, polyamide 6, water repellency, oil repellency, acid rain
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:NTF - Naravoslovnotehniška fakulteta
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2020
Št. strani:15 str.
Številčenje:Vol. 12, iss. 10, art. 2251
PID:20.500.12556/RUL-134647 Povezava se odpre v novem oknu
UDK:677
ISSN pri članku:2073-4360
DOI:10.3390/polym12102251 Povezava se odpre v novem oknu
COBISS.SI-ID:31028227 Povezava se odpre v novem oknu
Datum objave v RUL:24.01.2022
Število ogledov:1473
Število prenosov:186
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Polymers
Skrajšan naslov:Polymers
Založnik:MDPI
ISSN:2073-4360
COBISS.SI-ID:517951257 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
Začetek licenciranja:01.10.2020

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:ph odzivna barvila, bromokrezol zelena, poliamid 6, vodoodbojnost, oljeodbojnost, kisli dež

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0213
Naslov:Tekstilije in ekologija

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj