Investigation of cutting performance of a circular saw blade based on ANSYS/LS-DYNA

Wang, Zhiwen (avtor), Zeng, Qingliang (avtor), Lu, Zhenguo (avtor), Wan, Lirong (avtor), Zhang, Xin (avtor), Liu, Zhihai (avtor)

The circular saw blade is widely applied in rock processing; its cutting performance significantly impacts rock processing. Therefore, the numerical simulation model of rock cutting with the flexible circular saw blade has been established to investigate the effects of cutting parameters on the stress and cutting force of circular saw blade, and the damage and stress of rock in the circular saw blade cutting into rock vertically at constant feed speed and rotation speed. The research results indicate that the stress of the saw blade and rock rises with the increase of feed speed and rotation speed of the saw blade. Furthermore, the rock damage and the cutting force of the circular saw blade increase with the increasing feed speed and decrease with increasing rotation speed. The circular saw blade cutting force, vertical force, and horizontal force increase with the rising distance between the double circular saw blade. However, the axial force decreases. The research results of cutting hard rock with the flexible circular saw blade can aid in the optimization of cutting parameters and improve cutting efficiency.

• Jezik: Angleški jezik
• Ključne besede: circular saw blade, rock damage, cutting force, stress
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2021
• Št. strani: Str. 649-665
• Številčenje: Vol. 67, no. 12
• PID: 20.500.12556/RUL-134588
• UDK: 621.9
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2021.7322
• COBISS.SI-ID: 94094851
• Datum objave v RUL: 19.01.2022

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Preiskava zmogljivosti rezanja s krožno žago v paketu ANSYS/LS-DYNA
• Ključne besede: list krožne žage, poškodbe kamna, rezalna sila, napetost, podajanje, vrtilna hitrost