Podrobno

Mechanical properties of adhesive joints made with pressure-sensitive adhesives
ID Rudawska, Anna (Avtor), ID Wahab, Magd Abdel (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (711,29 KB)
MD5: C194E8A203545C41883DE37C9F29DCE7
URLURL - Izvorni URL, za dostop obiščite https://www.sv-jme.eu/sl/article/mechanical-properties-of-adhesive-joints-made-with-pressure-sensitive-adhesives/ Povezava se odpre v novem oknu

Izvleček
The paper aims to determine the mechanical properties of the adhesive joints made with acrylic pressure-sensitive adhesives. Two types of double-sided acrylic pressure-sensitive adhesive tapes are used. Three construction materials are used to prepare the adhesive joints: structural steel sheet (C45), aluminium alloy sheet (EN-AW 5754), and titanium sheet (Grade 2). Strength tests of adhesive joints made with the pressure-sensitive adhesive tapes are carried out both after conditioning time at room temperature (23 °C) and subjected to thermal shocks (500 cycles: +60 °C / -40 °C). Strength tests are carried out based on the DIN EN 1465 standard on a Zwick/Roell Z150 testing machine. The main conclusion from the tests carried out was the positive effect of thermal shocks on the mechanical strength of joints bonded with pressure-sensitive adhesive tape.

Jezik:Angleški jezik
Ključne besede:adhesive joints, pressure-sensitive adhesive, mechanical properties, thermal shocks
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2021
Št. strani:Str. 380-388
Številčenje:Vol. 67, no. 7/8
PID:20.500.12556/RUL-130972 Povezava se odpre v novem oknu
UDK:621.828:669.715
ISSN pri članku:0039-2480
DOI:10.5545/sv-jme.2021.7253 Povezava se odpre v novem oknu
COBISS.SI-ID:76907779 Povezava se odpre v novem oknu
Datum objave v RUL:20.09.2021
Število ogledov:1206
Število prenosov:184
Metapodatki:XML DC-XML DC-RDF
:
RUDAWSKA, Anna in WAHAB, Magd Abdel, 2021, Mechanical properties of adhesive joints made with pressure-sensitive adhesives. Strojniški vestnik [na spletu]. 2021. Vol. 67, no. 7/8, p. 380–388. [Dostopano 6 april 2025]. DOI 10.5545/sv-jme.2021.7253. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=130972
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Strojniški vestnik
Skrajšan naslov:Stroj. vestn.
Založnik:Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
ISSN:0039-2480
COBISS.SI-ID:762116 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Slovenski jezik
Naslov:Mehanske lastnosti lepljenih spojev, izdelanih z lepili, občutljivimi na tlak
Ključne besede:lepljeni spoji, jeklo, aluminijeve zlitine, lepila, mehanske lastnosti, temperaturni šoki

Podobna dela

Podobna dela v RUL:
  1. Long-term object tracking using region proposals
  2. Segmentacija rok za obogateno resničnost
  3. Improving quality of scanned visual content using convolutional neural networks
  4. Recovery of superquadric parameters from depth images using deep learning
  5. Discriminative correlation filter with segmentation and context for robust tracking
Podobna dela v drugih slovenskih zbirkah:
  1. Trans-esophageal endobronchial ultrasound-guided needle aspiration (EUS-B-NA)
  2. Expression patterns and prognostic relevance of subtype-specific transcription factors in surgically resected small cell lung cancer
  3. Sequential afatinib and osimertinib in patients with EGFR mutation-positive non-small-cell lung cancer
  4. Sequential afatinib and osimertinib in patients with EGFR mutation-positive non-small-cell lung cancer
  5. Zdravljenje bolnikov s plevralno karcinozo pri nemikrocelularnem (NMCCP) karcinomu s humanim interferonom alfa (INFA-alfa)

Nazaj